Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g01236019 |
Technicians have asked how to identify the ports for properly plumbing a 5P-0306 Vacuum Transducer. There are three ports on the vacuum transducer. The P+ port is the positive pressure or the supply port. The port marked P- is the negative pressure or the vacuum port. (P+) +(P-) identifies the exhaust port.
Caterpillar Information System:
C11 and C13 Engines Engine Oil Pressure Sensor
2006/01/30 Installation Instructions for the Grease Fittings on Hydraulic Hammers {6333}
320D and 323D Excavators Machine System Specifications Stick Cylinder
320D and 323D Excavators Machine System Specifications Boom Cylinder
Fast Fill System-Fuel {1273, 1279, 1710} Fast Fill System-Fuel {1273, 1279, 1710}
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
325D and 329D Excavators and 325D Material Handler Machine System Specifications Recoil Spring
3064 and 3066 Engines for Caterpillar Built Machines Exhaust Manifold
330D, 336D and 340D Excavators Hydraulic System Hydraulic Oil Cooler
330B Excavator Machine System Specifications Front Idler
C6.6 Engines for Caterpillar Built Machines Starter Motor
C15 Engine for the 657G Wheel Tractor-Scraper Ether Injection System - Test
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}
Squeal which is Caused by the Pressure Relief Valve on 301.6C, 301.8C and 302.5C Mini Hydraulic Excavators{5057, 5264} Squeal which is Caused by the Pressure Relief Valve on 301.6C, 301.8C and 302.5C Mini Hydraulic Excavators{5057, 5264}
2006/04/24 A Conical Bumper Has Been Added for the Alignment of the Rear Hood on Mini Hydraulic Excavators {1051, 7251}
2006/01/30 Improved Air Conditioning Circulation on Excavator {7251, 7276}
303.5C and 303C Mini Hydraulic Excavators Machine Systems Pilot Valve (Boom Swing) - Disassemble
303.5C and 303C Mini Hydraulic Excavators Machine Systems Pilot Valve (Boom Swing) - Assemble
Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
C15 Engine for the 657G Wheel Tractor-Scraper Event Codes
2006/03/27 Relocation of the Quick Disconnect Connector's on the Excavator Stick {1329, 5057}
2006/01/30 Installation Procedure for Accumulators on Mini Hydraulic Excavators {5077}
330D and 336D Excavators Machine System Specifications Main Hydraulic Pump
325D and 329D Excavators Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)