Starter Motor
Show/hide table
| |
| Illustration 1 | g01352648 |
|
Typical example | |
No load conditions
- Speed ... 2000 rpm minimum
- Current draw ... 600 Amp maximum
- Voltage ... 23.5 V
- Current draw ... 600 Amp maximum
Rated voltage ... 24 V
(1) Tighten the positive terminal nut to the following torque. ...
(2) Tighten the nut for the solenoid terminal to the following torque. ...
(3) Tighten the nut on the negative terminal to the following torque. ...
Caterpillar Information System:
C15 Engine for the 657G Wheel Tractor-Scraper Ether Injection System - Test
M325D and M330D Excavators Power Train Electronic Control System Electronic Control Module (ECM) - Configure
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3066
M325D and M330D Excavators Power Train Electronic Control System Calibration
2006/01/02 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
C6.6 Engines for Caterpillar Built Machines Flywheel Housing
C6.6 Engines for Caterpillar Built Machines Cylinder Head Valves
2006/03/20 New Turbochargers are Now Used {1052}
C6.6 Engines for Caterpillar Built Machines Rocker Shaft
2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Compressor
330D, 336D and 340D Excavators Hydraulic System Hydraulic Tank and Filter
330B Excavator Machine System Specifications Front Idler
330D, 336D and 340D Excavators Hydraulic System Hydraulic Oil Cooler
3064 and 3066 Engines for Caterpillar Built Machines Exhaust Manifold
325D and 329D Excavators and 325D Material Handler Machine System Specifications Recoil Spring
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
Fast Fill System-Fuel {1273, 1279, 1710} Fast Fill System-Fuel {1273, 1279, 1710}
320D and 323D Excavators Machine System Specifications Boom Cylinder
320D and 323D Excavators Machine System Specifications Stick Cylinder
2006/01/30 Installation Instructions for the Grease Fittings on Hydraulic Hammers {6333}
C11 and C13 Engines Engine Oil Pressure Sensor
2006/01/23 Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}