Refrigerant Compressor
Kompresor
Show/hide table
 | |
| Ilustrasi 1 | g02914877 |
(1 ) Puli (2 ) Koil (3 ) Stator (4) Rotor (5) Penutup debu (6) Hub (7) Bantalan (8) Kopling magnetik (9) Poros (10) Kompresor | |
Catatan: Untuk informasi spesifikasi torsi saluran refrigerant, rujuk ke Spesifikasi, "Saluran AC".
Show/hide table
| Spesifikasi untuk Grup Kompresor Refrigerant 259-7244 | |||
| Item | Jml | Suku Cadang | Deskripsi Spesifikasi |
| A | Bila diperlukan, gunakan ring berikut untuk memperoleh ruang 0,35 hingga 0,60 mm (0,014 hingga 0,024 in.) antara rotor (4) dan hub (6) : |
||
| 1 | Ring 264-9982 | Ketebalan 0,10 ± 0,03 mm (0,004 ± 0,001 in). |
|
| 1 | Ring 264-9983 | Ketebalan 0,30 ± 0,03 mm (0,012 ± 0,001 in). |
|
| 1 | Ring 264-9984 | Ketebalan 0,50 ± 0,03 mm (0,020 ± 0,001 in). |
|
| 11 | - | - | Kencangkan relief valve tekanan dengan torsi 13,20 ± 1,47 N·m (116,83 ± 13,01 lb in). Tekanan pembukaan relief valve tekanan 3,785 ± 0,355 MPa (548,968 ± 51,488 psi). Tekanan penutupan 2,75 MPa (398,85 psi). |
| - | - | - | Tegangan Sabuk: Untuk sabuk baru 534 ± 22 N (120 ± 5 lb). Untuk sabuk bekas 400 ± 44 N (90 ± 10 lb). |
| - | - | - | Tegangan sabuk bekas adalah untuk sabuk yang telah dioperasikan sekurangnya selama 30 menit pada kecepatan tetapan. Operasikan AC selama 30 menit. Kemudian, setel sabuk penggerak dengan tegangan 400 ± 44 N (90 ± 10 lb). |
| - | - | - | Gunakan Pengukur Ketegangan Sabuk 144-0235 Caterpillar. |
| - | - | - | Koneksi daya - Konektor DT dua pin. Tipe kompresor 10S17. Volume perpindahan per putaran 160,00 cc (9,76 in. kubik). RPM kontinu maksimum yang diizinkan 6000. Refrigerant R-134a: Dupont - SUVA TRANS A/C HFC134a. ICI - KLEA 134a Oli Refrigerant: Tipe oli kompresor ND-OIL8. Kapasitas oli kompresor 160,0 mL (5,4 oz). Kopling Magnetik: Tipe kopling magnetik L50T. Tegangan tetapan kopling magnetik 24 VDC. Konsumsi daya 40 W atau kurang. Diameter efektif puli 133,0 mm (5,24 in). |
Caterpillar Information System:
330D, 336D and 340D Excavators Hydraulic System Hydraulic Tank and Filter
3064 and 3066 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
330D, 336D and 340D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 06
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 05
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Condenser
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 03
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2142 - FMI 04
C6.6 Engines for Caterpillar Built Machines Front Housing and Covers
320D and 323D Excavators Machine System Specifications Fuel Tank
330D, 336D and 340D Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
C6.6 Engines for Caterpillar Built Machines Connecting Rod
2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
C6.6 Engines for Caterpillar Built Machines Rocker Shaft
2006/03/20 New Turbochargers are Now Used {1052}
C6.6 Engines for Caterpillar Built Machines Cylinder Head Valves
C6.6 Engines for Caterpillar Built Machines Flywheel Housing
2006/01/02 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
M325D and M330D Excavators Power Train Electronic Control System Calibration
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3066
M325D and M330D Excavators Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C15 Engine for the 657G Wheel Tractor-Scraper Ether Injection System - Test
C6.6 Engines for Caterpillar Built Machines Starter Motor
330B Excavator Machine System Specifications Front Idler