C6.6 Engines for Caterpillar Built Machines Caterpillar


Rocker Shaft

Usage:

CS-56B 437



图 1g01344758

典型实例

(1) 锁紧螺母

锁紧螺母扭矩 ... 27 ± 5.5 N·m (20 ± 4 lb ft)

(2) 卡环

(3) 弹簧

(4) 调节器

(5) 弹簧

(6) 进气摇臂

摇臂孔直径 ... 25.013 至 25.051 mm (0.9848 至 0.9863 in)

(7) 排气摇臂

摇臂孔直径 ... 25.013 至 25.051 mm (0.9848 至 0.9863 in)

(8) 摇臂轴

摇臂轴直径 ... 24.962 至 24.987 mm (0.9828 至 0.9837 in)

(9) 定位工具

(10) 底座




图 2g01344759

拧紧顺序

按照图 2 中所示的顺序拧紧摇臂螺栓。 将螺栓再次拧紧至以下扭矩。 ... 35 ± 3.5 N·m (26 ± 3 lb ft)

Caterpillar Information System:

2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Compressor
330D, 336D and 340D Excavators Hydraulic System Hydraulic Tank and Filter
3064 and 3066 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
330D, 336D and 340D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 06
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 05
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Condenser
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2149 - FMI 03
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 2142 - FMI 04
C6.6 Engines for Caterpillar Built Machines Front Housing and Covers
320D and 323D Excavators Machine System Specifications Fuel Tank
2006/03/20 New Turbochargers are Now Used {1052}
C6.6 Engines for Caterpillar Built Machines Cylinder Head Valves
C6.6 Engines for Caterpillar Built Machines Flywheel Housing
2006/01/02 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
M325D and M330D Excavators Power Train Electronic Control System Calibration
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3066
M325D and M330D Excavators Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C15 Engine for the 657G Wheel Tractor-Scraper Ether Injection System - Test
C6.6 Engines for Caterpillar Built Machines Starter Motor
330B Excavator Machine System Specifications Front Idler
330D, 336D and 340D Excavators Hydraulic System Hydraulic Oil Cooler
3064 and 3066 Engines for Caterpillar Built Machines Exhaust Manifold
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.