Swing Motor and Swing Drive - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
| B | 5P-3931 | Anti-Seize Compound | 1 |
| C | - | Guide Stud M16 x 2 x 180mm |
2 |
- Attach Tooling (A) and a suitable lifting device to the swing motor and swing drive (2). The weight of the swing motor and swing drive (2) is approximately 61 kg (135 lb). Install the swing motor and swing drive (2). Apply Tooling (B) to bolts (3). Install bolts (3). Tooling (C) may be used in order to aid in the installation of the swing motor and swing drive (2) .
Show/hide table
 | |
| Illustration 1 | g01228859 |
Show/hide table
 | |
| Illustration 2 | g01228482 |
Show/hide table
 | |
| Illustration 3 | g01228269 |
- Connect hose assemblies (1) and (3) to the rear and from the left side of swing motor (2) .
Show/hide table
 | |
| Illustration 4 | g01228268 |
End By: Install the platform. Refer to Disassembly and Assembly, "Platform - Install".
Caterpillar Information System:
2006/03/27 A Guard is Available to Protect the Boom Load Control Valve on Equipped Machines {5811, 7150}
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 325D/329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 325D/329D
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Hydraulic Tank and Filter
345C Excavator Safety Messages
345C Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Pedal Control (Auxiliary)
Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068} Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068}
330D and 336D Excavators Machine System Specifications Gear Pump
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 324D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 324D
2005/12/19 Lubrication of the Swing Frame for the Boom is Not Required {5105, 6506}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Boom Lines
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Disassemble
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Assemble
Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
M325D and M330D Excavators Power Train Electronic Control System Travel Motor Control Function
BH150 and BH160 Skid Steer Loader Backhoes Hydraulic Cylinder Cycle Time - Check
304C and 305C Mini Hydraulic Excavators Machine Systems Swivel - Remove
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Disassemble