Load Control Valve (Stick Cylinder) - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | FT-2674     | 真空盖     | 1     |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将工具 (A) 连接到液压箱。 对工具 (A) 施加 344 ± 70 kPa (50 ± 10 psi) 的压力。
Show/hide table
图 1 | g00690963 |
- 安装沉降阻尼阀 (6) 和螺栓 (4) 。
Show/hide table
图 2 | g00953950 |
- 安装螺栓 (3) 。
- 连接软管组件 (7) 和 (5) 。
- 卸下工具 (A) 。
- 检查液压油箱的油位。 请参阅操作和保养手册, "液压系统油位 – 检查"。
- 将盖安装到液压油箱上。
- 安装盖 (2) 和 (1) 。
Show/hide table
图 3 | g01220136 |
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Remove
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
304C and 305C Mini Hydraulic Excavators Machine Systems Swivel - Remove
BH150 and BH160 Skid Steer Loader Backhoes Hydraulic Cylinder Cycle Time - Check
M325D and M330D Excavators Power Train Electronic Control System Travel Motor Control Function
Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Assemble
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Disassemble
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Boom Lines
2005/12/19 Lubrication of the Swing Frame for the Boom is Not Required {5105, 6506}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install
2006/03/27 A Guard is Available to Protect the Boom Load Control Valve on Equipped Machines {5811, 7150}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Assemble
C6.6 Engines for Caterpillar Built Machines General Information
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Fasteners - Swing Drive and Final Drive
330D Excavator Machine System Specifications Upper Frame
320D and 323D Excavators Machine System Specifications Governor Control
C6.6 Engines for Caterpillar Built Machines Fuel System
330D and 336D Excavators Machine System Specifications Counterweight
319D Excavator Circuit Breakers - Reset
2006/02/20 New Supplier for Glow Plugs {1412}
M325D and M330D Excavators Power Train Electronic Control System Travel Speed Range Function
C6.6 Engines for Caterpillar Built Machines Electronic Control System Components