Boom Lines
Show/hide table
 | |
| 图 1 | g01426546 |
典型实例 | |
(1) 排气螺钉的扭矩 ... 12.7 ± 2.0 N·m (110 ± 18 lb in)
(B) 管组件端部与动臂底部销中心线之间的距离 ... 130 ± 5 mm (5.1 ± 0.2 in)
(C) 安装螺栓中心与动臂底部销中心线之间的距离 ... 215 mm (8.5 in)
Caterpillar Information System:
2005/12/19 Lubrication of the Swing Frame for the Boom is Not Required {5105, 6506}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install
2006/03/27 A Guard is Available to Protect the Boom Load Control Valve on Equipped Machines {5811, 7150}
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 325D/329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 325D/329D
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Hydraulic Tank and Filter
345C Excavator Safety Messages
345C Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Pedal Control (Auxiliary)
Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068} Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068}
330D and 336D Excavators Machine System Specifications Gear Pump
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Disassemble
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Assemble
Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
M325D and M330D Excavators Power Train Electronic Control System Travel Motor Control Function
BH150 and BH160 Skid Steer Loader Backhoes Hydraulic Cylinder Cycle Time - Check
304C and 305C Mini Hydraulic Excavators Machine Systems Swivel - Remove
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Stick Cylinder) - Assemble
C6.6 Engines for Caterpillar Built Machines General Information