330D and 336D Excavators Machine System Specifications Caterpillar


Gear Pump

Usage:

330D MH C5K



图 1g01628516

旋转 ... 顺时针

排量 ... 25 cc (1.5 cu in)

对于试验,采用 ISO VG32 或 VG46 机油 50 °C (122 °F)。

全速下试验

输出 ... 43 L/min (11.4 US gpm)
压力 ... 3900 kPa (565 psi)
泵速度 ... 1800 rpm
发动机转速 ... 1800 rpm

半速下试验

输出 ... 21.5 L/min (5.7 US gpm)
压力 ... 3900 kPa (565 psi)
泵速度 ... 900 rpm
发动机转速 ... 900 rpm

(1) 两只螺栓的扭矩 ... 33 ± 5 N·m (24 ± 4 lb ft)

Caterpillar Information System:

320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 324D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 324D
330D MHPU Mobile Hydraulic Power Unit Hydraulic System Pilot Hydraulic System - Heavy Lift and Fine Swing
M325D and M330D Excavators Power Train Electronic Control System Travel Activation Function
330 MHPUD Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank
2006/03/06 An Improved Seal is Used {1151, 1166}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Air Conditioner Lines
320D and 323D Excavators Machine System Specifications Main Control Valve
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Specifications - 324D
2005/12/12 New Injectors are Being Offered in Place of Remanufactured Injectors {1000, 1251, 1254, 1290, 1713}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Remove
303.5C and 303C Mini Hydraulic Excavators Machine Systems Fuel Tank - Remove and Install
Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068} Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Pedal Control (Auxiliary)
345C Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
345C Excavator Safety Messages
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Hydraulic Tank and Filter
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 325D/329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 325D/329D
2006/03/27 A Guard is Available to Protect the Boom Load Control Valve on Equipped Machines {5811, 7150}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install
2005/12/19 Lubrication of the Swing Frame for the Boom is Not Required {5105, 6506}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Boom Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.