Specifications - 325D/ 329D
机器尺寸
Show/hide table
 | |
| 图 1 | g01158624 |
请参阅表 1 中的尺寸值。 | |
Show/hide table
| 325D L 和 329D L 挖掘机，带 18.2 m (60 ft) 前加长附件 |
|||
|---|---|---|---|
| 项目 | 325D L 和 329D L | ||
| 铲斗负载 | 0.45 m3 (0.6 yd3) (1) | 0.6 m3 (0.8 yd3) (2) | |
| 运输信息 | 总长 (A) | 14418 mm (47 ft 4 in) |
|
| 总高 (B) | 3227 mm (10 ft 7 in) |
||
| 总宽 (C) | 3390 mm (11 ft 1 in) |
||
| 履带板宽度 (D) | 800 mm (31.5 inch) |
||
| 驾驶室高度 (E) | 3036 mm (10 ft) |
||
| 离地面的最低高度 (F) | 512 mm (20 in) |
||
| 后侧回转半径 (G) | 3077 mm (10 ft 1 in) |
||
| 履带长度 (H) | 4842 mm (15 ft 11 in) |
||
| 车轮长度 (J) | 3994 mm (13 ft 1 in) |
||
| 最大回转速度 | 11.5 rpm | ||
| 高行驶速度 | 5.5 km/h (3.5 mph) |
||
| 低行驶速度 | 3.5 km/h (2.2 mph) |
||
Show/hide table
| ( 1 ) | 反铲铲斗 |
| ( 2 ) | 清沟铲斗 |
工作范围
Show/hide table
 | |
| 图 2 | g01227553 |
Show/hide table
| 前加长附件的工作范围 | ||
| 工作范围 | 0.45 m3 (0.6 yd3) (1) | 0.6 m3 (0.8 yd3) (2) |
| 最大伸出距离 (K) | 18520 mm (60 ft 9 in) |
18390 mm (60 ft 4 in) |
| 最大深度 (L) | 14750 mm (48 ft 5 in) |
14620 mm (48 ft) |
| 总高和卸载 (M) | 13625 mm (44 ft 8 in) |
13585 mm (44 ft 7 in) |
| 垂直壁的最大深度 (N) | 12770 mm (41 ft 11 in) |
13675 mm (44 ft 10 in) |
| 最大卸载高度 (P) | 11635 mm (38 ft 2 in) |
11685 mm (38 ft 4 in) |
| 最小卸载高度 (Q) | 1165 mm (3 ft 10 in) |
1295 mm (4 ft 3 in) |
| 在地面的最大伸出距离 (R) | 18425 mm (60 ft 5 in) |
18290 mm (60 ft) |
Show/hide table
| ( 1 ) | 反铲铲斗 |
| ( 2 ) | 清沟铲斗 |
Caterpillar Information System:
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 325D/329D
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Hydraulic Tank and Filter
345C Excavator Safety Messages
345C Excavator Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
325D and 329D Excavators and 325D Material Handler Machine System Specifications Hydraulic Pedal Control (Auxiliary)
Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068} Misalignment of the Suction Strainer Can Cause Aeration on 301.6C and 301.8C Mini Hydraulic Excavators{5056, 5068}
330D and 336D Excavators Machine System Specifications Gear Pump
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 324D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Cylinder Speed - Test and Adjust - 324D
330D MHPU Mobile Hydraulic Power Unit Hydraulic System Pilot Hydraulic System - Heavy Lift and Fine Swing
M325D and M330D Excavators Power Train Electronic Control System Travel Activation Function
330 MHPUD Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Relief Valve (Line) - Test and Adjust - 325D/329D
2006/03/27 A Guard is Available to Protect the Boom Load Control Valve on Equipped Machines {5811, 7150}
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Install
2005/12/19 Lubrication of the Swing Frame for the Boom is Not Required {5105, 6506}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Boom Lines
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Disassemble
304C and 305C Mini Hydraulic Excavators Machine Systems Swing Motor and Swing Drive - Assemble
Product Link Antenna Placement{7606} Product Link Antenna Placement{7606}
M325D and M330D Excavators Power Train Electronic Control System Travel Motor Control Function
BH150 and BH160 Skid Steer Loader Backhoes Hydraulic Cylinder Cycle Time - Check
304C and 305C Mini Hydraulic Excavators Machine Systems Swivel - Remove
2005/12/19 Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}