 | |
| Illustration 1 | g00691466 |
Typical example The 3003 engine is shown. | |
(1) Flywheel housing
(2) Bolts for the flywheel housing
- Tighten the bolts for the 3003 flywheel housing to the following torque. ... 50 N·m (37 lb ft)
- Tighten the bolts for the 3013, 3014, and 3024 flywheel housing to the following torque. ... 25 N·m (18 lb ft)
Flywheel Housing Runout
Face Runout (Axial Eccentricity) of the Flywheel Housing
 | |
| Illustration 2 | g00285931 |
Maximum permissible face runout (axial eccentricity) of an "SAE 4" flywheel housing ... 0.23 mm (0.009 inch)
Maximum permissible face runout (axial eccentricity) of an "SAE 5" flywheel housing ... 0.20 mm (0.008 inch)
Note: Refer to the Testing and Adjusting, "Flywheel Housing - Inspect" for information on measuring the face runout.
Bore Runout (Radial Eccentricity) of the Flywheel Housing
 | |
| Illustration 3 | g00285934 |
Maximum permissible bore runout (radial eccentricity) of an "SAE 4" flywheel housing ... 0.23 mm (0.009 inch)
Maximum permissible bore runout (radial eccentricity) of an "SAE 5" flywheel housing ... 0.20 mm (0.008 inch)
Note: Refer to the Testing and Adjusting, "Flywheel Housing - Inspect" for information on measuring the bore runout.