A New 169-4309 Mounting Bar Provides Easier Alignment of Heat Exchanger Plates {0708, 1379}
- Marine Engine :
- 3412 HEUI (S/N: 3JK1-UP; 60M1-UP)
- 3412 HEUI (S/N: 7BL1-UP)
Features/Benefits
- Use the mounting bar alignment tool to align the heat exchanger plates during disassembly and assembly.
- Repairs to the heat exchanger will be easier and faster.
- Two heat exchanger alignment guides are usually required per heat exchanger.
Show/hide table
 | |
| Illustration 1 | g00691953 |
169-4309 Mounting Bar | |
Specifications/Technical Information
Hex end ... 3/4 inch
Outside diameter ... 29.75 mm (1.17 inches)
Threaded end ... 5/8-11
Reference
See Disassembly and Assembly Manual, SENR5031, "3412 Engine"for more information.Caterpillar Information System:
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0051</B> Generator through <B>5N-0075</B> Generator
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
3034 Engine for Caterpillar Built Machines Piston Cooling Jet
3034 Engine for Caterpillar Built Machines Flywheel Housing
2000/03/01 190-02 "Loss of Engine RPM Signal" with an ADEM II ECM {1901, 1912}
G3516B Engines Engine Misfires, Runs Rough or Is Unstable
G3516B Engines Engine Cranks but Will Not Start
3034 Engine for Caterpillar Built Machines Fuel Filter Base
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel Housing
3126 Truck Engine Military Housing (Front) - Remove
G3516B Engines Engine Will Not Crank
G3304 and G3306 Engines Battery
2000/04/01 Improved Water Connection Group {1393}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Test
2000/04/01 Oil Mister Pump And Lines Groups No Longer Used {1105, 1319}
3114, 3116, and 3126 Engines Air Inlet and Exhaust System
3046 Engine for Caterpillar Built Machines Engine Oil Pressure Switch - Test
3046 Engine for Caterpillar Built Machines Coolant Temperature Switch - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Test
3064 and 3066 Engines for Caterpillar Built Machines Alternator - Test
2000/04/17 New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Electric Starting System - Test
3500B Engines Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 1)
3618 Engine Fuel Transfer Pump - Remove