Fuel Transfer Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn OFF the fuel supply to the engine.
- Disconnect tube assemblies (1) and (2) (not shown) from fuel transfer pump (4). Cap the openings or plug the openings immediately.
Show/hide table
Illustration 1 | g00692995 |
- Remove bolts (3) in order to remove fuel transfer pump (4) .
- Remove the O-ring seal from fuel transfer pump (4) .
Caterpillar Information System:
3500B Engines Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 1)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Electric Starting System - Test
2000/04/17 New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
3064 and 3066 Engines for Caterpillar Built Machines Alternator - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Test
3046 Engine for Caterpillar Built Machines Coolant Temperature Switch - Test
3046 Engine for Caterpillar Built Machines Engine Oil Pressure Switch - Test
3114, 3116, and 3126 Engines Air Inlet and Exhaust System
2000/04/01 Oil Mister Pump And Lines Groups No Longer Used {1105, 1319}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Test
2000/04/01 Improved Water Connection Group {1393}
2000/04/17 A New 169-4309 Mounting Bar Provides Easier Alignment of Heat Exchanger Plates {0708, 1379}
3034 Engine for Caterpillar Built Machines Main Bearing Journal
3612 and 3616 Engines Woodward EGB29P Governor
SR4 and SR4B Generators and Control Panels Caterpillar Monitoring System - For Generator Sets with the EMCP II, EMCP II+, and EMCP II+P Control Panels
3612 and 3616 Engines Fuel Pressure Control Valve - Assemble
3054 Engine Fuel Quality - Test
3034 Engine for Caterpillar Built Machines Connecting Rod Bearing Journal
345B Series II Excavator Machine System Specifications Boom - 6.55 m (21.489 ft)
3126B Engines for Caterpillar Built Machines Engine Oil Pump - Install
3618 Engine Fuel Transfer Pump - Disassemble
3064 and 3066 Engines for Caterpillar Built Machines Flywheel Housing - Inspect
3618 Engine Fuel Transfer Pump - Install
2000/05/01 Summary Listing of Gas Engine News Articles {1000}