Flywheel Housing
Show/hide table
 | |
| Illustration 1 | g00691647 |
Flywheel housing | |
(1) Bolts for the flywheel housing
- Tighten the bolts to the following torque. ... 78 N·m (58 lb ft)
Caterpillar Information System:
2000/03/01 190-02 "Loss of Engine RPM Signal" with an ADEM II ECM {1901, 1912}
G3516B Engines Engine Misfires, Runs Rough or Is Unstable
G3516B Engines Engine Cranks but Will Not Start
3034 Engine for Caterpillar Built Machines Fuel Filter Base
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel Housing
3126 Truck Engine Military Housing (Front) - Remove
G3516B Engines Engine Will Not Crank
G3304 and G3306 Engines Battery
3612 and 3616 Engines Test Tools for the Electrical System
3612 and 3616 Engines Lubricator and Strainer
3612 and 3616 Engines Pressure Regulating Valve
G3520B Engines Symptoms
3034 Engine for Caterpillar Built Machines Piston Cooling Jet
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0051</B> Generator through <B>5N-0075</B> Generator
2000/04/17 A New 169-4309 Mounting Bar Provides Easier Alignment of Heat Exchanger Plates {0708, 1379}
2000/04/01 Improved Water Connection Group {1393}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Test
2000/04/01 Oil Mister Pump And Lines Groups No Longer Used {1105, 1319}
3114, 3116, and 3126 Engines Air Inlet and Exhaust System
3046 Engine for Caterpillar Built Machines Engine Oil Pressure Switch - Test
3046 Engine for Caterpillar Built Machines Coolant Temperature Switch - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Test
3064 and 3066 Engines for Caterpillar Built Machines Alternator - Test