Fuel Filter and Water Separator Base - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Open the access door on the left side of the machine.
- Move the battery disconnect switch to the OFF position.
- Move the fuel shutoff valve to the OFF position. Refer to Operation and Maintenance Manual, "Fuel Tank Shutoff and Drain Control".
- Disconnect hose assemblies (1). Disconnect harness assembly (3). Remove bolts (2). Remove water separator (4) .
Show/hide table
 | |
| Illustration 1 | g01194720 |
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench | 1 |
- Position water separator (4). Install bolts (2). Connect harness assembly (3). Connect hose assembly (1).
Show/hide table
| | |
| Illustration 2 | g01194720 |
- Move the fuel shutoff valve to the ON position. Refer to Operation and Maintenance Manual, "Fuel Tank Shutoff and Drain Control".
- Move the battery disconnect switch to the ON position.
- Close the access door on the left side of the machine.
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom - Remove and Install
416E Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
C7.1 Engines for Caterpillar Built Machines Flywheel Housing
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Transfer Pump - Remove and Install
C7 and C9 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Work Tool Control
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Priming Pump - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Hydraulic Lockout) - Remove and Install
PP120 and PH126 Power Pack and Hammer Plate Locations and Film Locations
3406C Engines for Caterpillar Built Machines Engine Oil Pump
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
2005/08/22 Lubrication Procedure for the Master Links in the Track {4169}
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Monitoring System
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble - Joystick Steering
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble - Joystick Steering
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Code List
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Hood - Remove and Install
PP120 and PH126 Power Pack and Hammer System Pressure - Release
PP120 and PH126 Power Pack and Hammer Work Tool Installation and Removal
Cast Pin Grabber Quick Coupler Specifications
Cast Pin Grabber Quick Coupler Approved Machines