Hood - Remove and Install
拆卸步骤
- 打开护罩,以便进入到发动机。
- 将合适的起吊设备连接到发动机罩组件 (2) 上。 发动机罩组件 (2) 的重量约为 57 kg (125 lb)。 拆下螺栓 (1) 。 拆下发动机罩组件 (2) 。
Show/hide table
图 1 | g01195077 |
- 打开左前方的检测门,以便打开检测门 (4) 。 拆下螺栓 (3) 。 打开检修门 (4) 并将 (4) 固定。
Show/hide table
图 2 | g01195080 |
- 将合适的起吊设备连接到发动机罩组件 (5) 上。 发动机罩组件 (5) 的重量约为 68 kg (150 lb)。 拆下螺栓 (6) 。 拆下发动机罩组件 (5) 。
Show/hide table
图 3 | g01195085 |
- 将合适的起吊设备连接到发动机罩组件 (7) 上。 发动机罩组件 (7) 的重量约为 34 kg (75 lb)。
Show/hide table
图 4 | g01195130 |
- 从发动机罩组件 (7) 上断开支架 (8) 。
Show/hide table
图 5 | g01195089 |
- 在发动机罩组件 (7) 上施加一个轻微的提升力。 拆下螺栓 (9) 。 拆下发动机罩组件 (7) 。
Show/hide table
图 6 | g01195090 |
安装步骤
- 将合适的起吊设备连接到发动机罩组件 (7) 上。 发动机罩组件 (7) 的重量约为 34 kg (75 lb)。
Show/hide table
图 7 | g01195130 |
Show/hide table
图 8 | g01195090 |
- 将发动机罩组件 (7) 降至安装位置。 安装发动机罩组件 (7) 。 安装螺栓 (9) 。
- 将支架 (8) 连接到发动机罩组件 (7) 上。
Show/hide table
图 9 | g01195089 |
- 将合适的起吊设备连接到发动机罩组件 (5) 上。 发动机罩组件 (5) 的重量约为 68 kg (150 lb)。 安置发动机罩组件 (5) 。 安装螺栓 (6) 。
Show/hide table
图 10 | g01195085 |
- 关闭检修门 (4) 。 安装螺栓 (3) 。 关闭位于左前方的检测门。
Show/hide table
图 11 | g01195080 |
- 将合适的起吊设备连接到发动机罩组件 (2) 上。 发动机罩组件 (2) 的重量约为 57 kg (125 lb)。 定位发动机罩组件 (2) 。 安装螺栓 (1) 。
Show/hide table
图 12 | g01195077 |
Caterpillar Information System:
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Code List
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble - Joystick Steering
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble - Joystick Steering
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Monitoring System
2005/08/22 Lubrication Procedure for the Master Links in the Track {4169}
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom - Remove and Install
416E Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
C7.1 Engines for Caterpillar Built Machines Flywheel Housing
PP120 and PH126 Power Pack and Hammer System Pressure - Release
PP120 and PH126 Power Pack and Hammer Work Tool Installation and Removal
Cast Pin Grabber Quick Coupler Specifications
Cast Pin Grabber Quick Coupler Approved Machines
Cast Pin Grabber Quick Coupler Rated Load
H140D S, H160D S and H180D S Hydraulic Hammers Control Valve
Cast Pin Grabber Quick Coupler Quick Coupler Installation and Removal
PP120 and PH126 Power Pack and Hammer Tool Selection
PP120 and PH126 Power Pack and Hammer Daily Inspection
Pin Grabber Quick Coupler Operation
H140D S, H160D S and H180D S Hydraulic Hammers Pressure Control Valve
(Custom) Center-Lock Pin Grabber Coupler Lifting and Tying Down