Work Tool Installation and Removal
Installation of the Work Tool
Show/hide table
 | |
| Illustration 1 | g01195332 |
- Ensure that the flow control valve is in the OFF.
- Open the latch (1) .
- Insert the tool into the hammer.
- Close the latch.
- Remove the cover from the quick disconnect fitting.
- Clean the quick disconnect fitting.
- Connect the fittings on the power pack to the fittings on the work tool.
- Turn the flow control to the ON position.
Remove the Work Tool
- Turn the flow control to the OFF position.
- Disconnect the fittings.
- Place the cover on the quick disconnect fitting.
- Open the latch (1) .
- Remove the tool from the hammer.
Caterpillar Information System:
PP120 and PH126 Power Pack and Hammer System Pressure - Release
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Hood - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Code List
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Assemble - Joystick Steering
M318C and M322C Excavators Machine Systems Control Valve (Medium Pressure) - Disassemble - Joystick Steering
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Monitoring System
2005/08/22 Lubrication Procedure for the Master Links in the Track {4169}
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom - Remove and Install
416E Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
Cast Pin Grabber Quick Coupler Specifications
Cast Pin Grabber Quick Coupler Approved Machines
Cast Pin Grabber Quick Coupler Rated Load
H140D S, H160D S and H180D S Hydraulic Hammers Control Valve
Cast Pin Grabber Quick Coupler Quick Coupler Installation and Removal
PP120 and PH126 Power Pack and Hammer Tool Selection
PP120 and PH126 Power Pack and Hammer Daily Inspection
Pin Grabber Quick Coupler Operation
H140D S, H160D S and H180D S Hydraulic Hammers Pressure Control Valve
(Custom) Center-Lock Pin Grabber Coupler Lifting and Tying Down
Cast Pin Grabber Quick Coupler Quick Coupler - Inspect
Cast Pin Grabber Quick Coupler Reference Material