365C Excavator Machine Systems Caterpillar


Pedal Control (Travel) - Install

Usage:

365C ELC

安装步骤




    图 1g01188606

  1. 安装踏板控制装置 (13) 和螺栓 (14) 。



    图 2g01188533

  1. 安装踏板 (11) 和螺栓 (12) 。

  1. 安装踏板 (9) 和螺栓 (10) 。



    图 3g01188530

  1. 安装盖 (7) 和 (8) 。



    图 4g01188527

  1. 安装手柄 (4) 、螺栓 (5) 和螺栓 (6) 。



    图 5g01188968

  1. 重新安置地板垫 (3) 。



    图 6g01188526

  1. 连接线束组件 (2) 。



    图 7g01188524

    为了显示防护罩的位置而翻转了上部机架。

  1. 安装挡板 (1) 。

Caterpillar Information System:

365C Excavator Machine Systems Pedal Control (Travel) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
365C Excavator Machine Systems Relief Valve (Pilot) - Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Gear and Bearing - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Install
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Fuel Tank Cap and Strainer - Clean
345C MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Install
Pin Grabber Quick Hitch Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil - Change
365C Excavator Machine Systems Swivel - Remove
365C Excavator Machine Systems Swivel - Install
325D and 329D Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
C15 Petroleum Generator Set Engines Alternator and Regulator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.