2007/09/03 Caterpillar


Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}

Usage:

160H 2FM
Motor Grader:
160H (S/N: DBM162-286)
Track-Type Tractor:
D5N (S/N: AKD247-905; AGG111-1065)
D6N (S/N: ALH190-504; AKM314-1008; ALR211-414; ALY260-1115)
Service Magazine SEPD0794, 25 July 2005, "Replacement of the 223-3383 Washer Pump As on Certain Excavators, Motor Graders, and Track-Type Tractors". Disregard this article. See the article that follows.

The 223-3383 Washer Pump As that is installed on the listed machines is prone to failure due to corrosion inside the pump motor. The cause of this problem is a misplaced seal that enables water to penetrate the pump motor.

The assembly process for the 223-3383 Washer Pump As has been modified in order to correct the problem. In addition, a 100% test has been added in order to ensure the integrity of these units. For failure of the 223-3383 Washer Pump As, replace the unit with the same part number.

Caterpillar Information System:

302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
365C Excavator Machine Systems Pedal Control (Travel) - Install
365C Excavator Machine Systems Pedal Control (Travel) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
365C Excavator Machine Systems Relief Valve (Pilot) - Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Gear and Bearing - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Install
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Install
Pin Grabber Quick Hitch Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil - Change
365C Excavator Machine Systems Swivel - Remove
365C Excavator Machine Systems Swivel - Install
325D and 329D Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
C15 Petroleum Generator Set Engines Alternator and Regulator
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.