Swivel - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-1855 | 挡圈钳 | 1 |
| B | 138-7575 | 连杆支架 | 2 |
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零件上，从而在将来引发故障。 检查所有零件。 如果任何零件磨损或损坏，则应使用新零件进行更换。
- 使用工具 (B) 和适当的起吊设备安装回转接头 (16) 。
Show/hide table
 | |
| 图 1 | g01188756 |
- 安装挡圈 (15) 和螺栓 (14) 。
Show/hide table
 | |
| 图 2 | g01188755 |
- 安装螺栓 (11) 。
Show/hide table
 | |
| 图 3 | g01188754 |
- 安装接头 (10) 。
- 连接软管组件 (9) 、 (12) 和 (13) 。
- 用两个人安装盖 (8) 和螺栓 (7) 。
Show/hide table
 | |
| 图 4 | g01188752 |
- 安装支承 (5) 。
Show/hide table
 | |
| 图 5 | g01188751 |
- 使用工具 (A) 安装挡圈 (6) 。
- 连接软管组件 (1) 、 (2) 、 (3) 和 (4) 。
Show/hide table
 | |
| 图 6 | g01188750 |
Caterpillar Information System:
365C Excavator Machine Systems Swivel - Remove
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil - Change
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Install
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove
Pin Grabber Quick Hitch Plate Locations and Film Locations
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Install
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
365C Excavator Machine Systems Pedal Control (Travel) - Install
365C Excavator Machine Systems Pedal Control (Travel) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
325D and 329D Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
C15 Petroleum Generator Set Engines Alternator and Regulator
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Remove
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
304C and 305C Mini Hydraulic Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
365C Excavator Machine Systems Swing Control Valve - Remove
365C Excavator Machine Systems Swing Control Valve - Install
390D Excavator Machine Systems Cab - Remove
390D Excavator Machine Systems Cab - Install