Hydraulic Tank and Filter - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 4C-8358     | Eyebolt     | 1     |
B     | 138-7573     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Install retainer (44) and filter (43) .
Show/hide table
Illustration 1 | g01191773 |
- Install O-ring seal (42) .
- Install bolts (40) and cover (41) .
Show/hide table
Illustration 2 | g01191772 |
- Attach Tooling (A) and a suitable lifting device to hydraulic tank (39). The weight of hydraulic tank (39) is approximately 193 kg (425 lb).
Show/hide table
Illustration 3 | g01191771 |
- Position hydraulic tank (39) .
- Attach Tooling (B) and a suitable lifting device to radiator assembly (38) .
Show/hide table
Illustration 4 | g01191770 |
- Connect radiator assembly (38) to hydraulic tank (39) .
- Install bolts (37) into radiator assembly (38) .
Show/hide table
Illustration 5 | g01191679 |
- Install bolts (36) .
Show/hide table
Illustration 6 | g01191678 |
- Install bolts (35) into panel (33) .
Show/hide table
Illustration 7 | g01191676 |
- Install bolt (32) and bolts (34) into panel (33) .
Show/hide table
Illustration 8 | g01191675 |
- Connect hose assemblies (31) .
Show/hide table
Illustration 9 | g01191674 |
- Connect harness assembly (30) .
- Close access panel (28) and install bolts (29) .
Show/hide table
Illustration 10 | g01191673 |
- Connect hose assemblies (27) .
Show/hide table
Illustration 11 | g01191671 |
- Connect hose assemblies (25) and (26) .
Show/hide table
Illustration 12 | g01191670 |
- Position hose (24) and tighten hose clamps (23) .
- Connect harness assemblies (21) and (22) .
- Connect hose assemblies (20) .
Show/hide table
Illustration 13 | g01191625 |
- Position bracket (18) and install bolts (17) and (19) .
Show/hide table
Illustration 14 | g01191624 |
- Position panel (15) and install bolts (16) .
Show/hide table
Illustration 15 | g01191623 |
- Install bolts (14) into panel (15) .
Show/hide table
Illustration 16 | g01191622 |
- Attach a suitable lifting device to muffler (13). The weight of muffler (13) is approximately 20 kg (45 lb).
Show/hide table
Illustration 17 | g01191621 |
- Install muffler (13) and tube (10) .
- Position clamp (12) and tighten nut (11) .
Show/hide table
Illustration 18 | g01191620 |
- Install bolts (9) to tube (10) .
- Position tube assembly (7) and install nuts (8) .
Show/hide table
Illustration 19 | g01191619 |
- Install bolts (6) to tube assembly (7) .
Show/hide table
Illustration 20 | g01191617 |
- Install bolts (5) .
Show/hide table
Illustration 21 | g01190774 |
- Position cover (4) and install bolts (3) .
Show/hide table
Illustration 22 | g01189033 |
- Position junction box (2) and install bolts (1) .
Show/hide table
Illustration 23 | g01189032 |
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Lubrication Viscosities and Refill Capacities".
End By: Install the generator. Refer to Disassembly and Assembly, "Generator - Install".
Caterpillar Information System:
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove
Pin Grabber Quick Hitch Plate Locations and Film Locations
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Install
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
365C Excavator Machine Systems Pedal Control (Travel) - Install
365C Excavator Machine Systems Pedal Control (Travel) - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
365C Excavator Machine Systems Relief Valve (Pilot) - Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Disassemble
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Oil - Change
365C Excavator Machine Systems Swivel - Remove
365C Excavator Machine Systems Swivel - Install
325D and 329D Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
C15 Petroleum Generator Set Engines Alternator and Regulator
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Turbocharger - Remove
302.5C Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
304C and 305C Mini Hydraulic Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
365C Excavator Machine Systems Swing Control Valve - Remove