Control Manifold (Pilot Oil) - Install
安装步骤
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零件上,从而在将来引发故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新零件进行更换。
- 安装控制歧管 (16) 和安装螺栓 (18) 。
Show/hide table
图 1 | g01188366 |
- 连接软管组件 (1) 7。
- 连接软管组件 (15) 。
Show/hide table
图 2 | g01188364 |
- 连接软管组件 (13) 和 (14) 。
Show/hide table
图 3 | g01188363 |
- 连接线束组件 (12) 。
Show/hide table
图 4 | g01188361 |
- 连接软管组件 (10) 和 (11) 。
- 连接软管组件 (9) 。
Show/hide table
图 5 | g01188360 |
- 连接软管组件 (7) 和线束组件 (8) 。
Show/hide table
图 6 | g01188358 |
- 连接软管组件 (5) 和 (6) 。
Show/hide table
图 7 | g01188357 |
- 连接软管组件 (2) 、 (3) 和 (4) 。
Show/hide table
图 8 | g01188367 |
- 安装挡板 (1) 。
Show/hide table
图 9 | g01188355 |
为了显示防护罩的位置而翻转了上部机架。 |
- 向液压系统注油。 请参阅操作和保养手册, "加注容量"。
Caterpillar Information System:
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Fuel Tank Cap and Strainer - Clean
345C MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Disassemble
Pin Grabber Quick Hitch Quick Coupler Installation and Removal
Pin Grabber Quick Hitch Quick Coupler - Lubricate
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Muffler - Remove and Install
390D Excavator Machine Systems Joystick Control - Remove and Install - Right Hand
390D Excavator Machine Systems Joystick Control - Remove and Install - Left Hand
325C Excavator Engine Supplement Air Inlet Cover - Remove and Install
325C Excavator Engine Supplement Bottom Guard (Engine) - Remove and Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Engine Oil and Filter - Change
302.5C Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Swing Gear and Bearing - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Assemble
365C Excavator Machine Systems Relief Valve (Pilot) - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
365C Excavator Machine Systems Pedal Control (Travel) - Remove
365C Excavator Machine Systems Pedal Control (Travel) - Install
302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove