Swing Gear and Bearing - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 3     |
Start By:
- Separate the upper frame from the undercarriage frame. Refer to Disassembly and Assembly, "Upper Frame and Undercarriage Frame - Separate".
- Attach Tooling (A) and a suitable lifting device to swing gear and bearing (1) .
Show/hide table
Illustration 1 | g01188444 |
- Remove bolts (2). Remove swing gear and bearing (1). The weight of swing gear and bearing (1) is approximately 45 kg (100 lb).
- Remove tray (3) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 3     |
B     | 4C-4030     | Thread Lock Compound     | 1     |
- Position tray (3). Attach Tooling (A) and a suitable lifting device to swing gear and bearing (1) and position swing gear and bearing (1). The weight of swing gear and bearing (1) is approximately 45 kg (100 lb).
Note: Position Mark (S) on the swing gear so that Mark (S) is on the left side of the lower frame with the lower frame in the forward position.
Show/hide table
Illustration 2 | g01188444 |
- Install bolts (2). Tighten bolts (2) to a torque of 80 ± 15 N·m (59 ± 11 lb ft).
End By: Connect the upper frame to the undercarriage frame. Refer to Disassembly and Assembly, "Upper Frame and Undercarriage Frame - Connect".
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Install
365C Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Fuel Tank Cap and Strainer - Clean
345C MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Assemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Disassemble
Pin Grabber Quick Hitch Quick Coupler Installation and Removal
Pin Grabber Quick Hitch Quick Coupler - Lubricate
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Muffler - Remove and Install
390D Excavator Machine Systems Joystick Control - Remove and Install - Right Hand
390D Excavator Machine Systems Joystick Control - Remove and Install - Left Hand
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Assemble
365C Excavator Machine Systems Relief Valve (Pilot) - Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Exhaust Manifold - Remove and Install
365C Excavator Machine Systems Pedal Control (Travel) - Remove
365C Excavator Machine Systems Pedal Control (Travel) - Install
302.5C Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
2007/09/03 Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Remove
365C Excavator Machine Systems Oil Filter (Hydraulic, Return) - Install
Pin Grabber Quick Hitch Plate Locations and Film Locations
M318C and M322C Excavators Machine Systems Hydraulic Tank and Filter - Remove