Fan - Remove and Install
Removal Procedure
Start By:
- Remove the radiator. Refer to Disassembly and Assembly, "Radiator - Remove and Install".
- Remove bolts (1), fan assembly (2), and the spacers.
Show/hide table
 | |
| Illustration 1 | g01175561 |
Installation Procedure
- Position the spacers and fan assembly (2). Install bolts (1) .
Show/hide table
| | |
| Illustration 2 | g01175561 |
End By: Install the radiator. Refer to Disassembly and Assembly, "Radiator - Remove and Install".
Caterpillar Information System:
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Install
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
MR-244 Work Tool Work Tool Troubleshooting
MR-244 Work Tool Work Tool Preparation for Troubleshooting
M318C and M322C Excavators Engine Supplement Flywheel - Remove and Install
BR160, BR166, BR172, BR272 and BR378 Brush Cutters General Information
BR160, BR166, BR172, BR272 and BR378 Brush Cutters Hydraulic System
C15 and C18 Petroleum Generator Sets Electrical System
302.5C Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Fuel Transfer Pump - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Capacities (Refill)
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Electric Starting Motor - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Engine - Remove
325D and 329D Excavators Hydraulic System Solenoid Valve (Hydraulic Lockout)
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Assemble
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Motor
W345C Excavator Cab Tilting
325D and 329D Excavators Hydraulic System Pilot Valve (Joystick)
325D and 329D Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
Pin Grabber Quick Coupler Spring (Blocking Bar) - Inspect
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Remove
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Gear Pump (Pilot) - Assemble