Electric Starting Motor - Remove and Install
Removal Procedure
- Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Inspect/Replace".
- Remove access panel (1) that is located behind the seat.
Show/hide table
Illustration 1 | g01175211 |
- Disconnect harness assembly (2) and cable assembly (4) .
Show/hide table
Illustration 2 | g01175384 |
- Remove cable strap (3) .
- Remove bolts (6). Remove electric starting motor (5) .
Installation Procedure
- Position electric starting motor (5) and install bolts (6) .
Show/hide table
Illustration 3 | g01175384 |
- Connect harness assembly (2) and cable assembly (4) .
- Install cable strap (3) .
- Install access panel (1) that is located behind the seat.
Show/hide table
Illustration 4 | g01175211 |
- Connect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Inspect/Replace".
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Fuel Transfer Pump - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Capacities (Refill)
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Electric Starting Motor - Remove and Install
568 GF and 568 LL Forest Machine Leaving the Machine
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
Hydraulic Cylinder Repair Process {7562} Hydraulic Cylinder Repair Process {7562}
345C Excavators Joystick Controls
323D Excavator Equipment Lowering with Engine Stopped
Troubleshooting Instructions for the 157-3210 Control Panel {1408, 7320} Troubleshooting Instructions for the 157-3210 Control Panel {1408, 7320}
M318C and M322C Wheeled Excavators Power Train Axle - Install - Rear Axle
M318C and M322C Wheeled Excavators Power Train Axle - Remove - Rear Axle
325D Material Handler Storage Box
C15 and C18 Petroleum Generator Sets Electrical System
BR160, BR166, BR172, BR272 and BR378 Brush Cutters Hydraulic System
BR160, BR166, BR172, BR272 and BR378 Brush Cutters General Information
M318C and M322C Excavators Engine Supplement Flywheel - Remove and Install
MR-244 Work Tool Work Tool Preparation for Troubleshooting
MR-244 Work Tool Work Tool Troubleshooting
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Install
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Fan - Remove and Install
302.5C Mini Hydraulic Excavator Engine Supplement Engine - Remove
325D and 329D Excavators Hydraulic System Solenoid Valve (Hydraulic Lockout)
345C MHPU Mobile Hydraulic Power Unit Machine Systems Piston Motor (Hydraulic Fan) - Disassemble