Gear Pump (Pilot)
Show/hide table
图 1 | g01173282 |
先导泵 |
先导泵是一种齿轮泵,用于向先导系统供油。 先导泵通过机械方式连接到驱动泵。 带载时的泵输送流速约为 36 L/min (9.5 US gpm)。
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Hydraulic Oil Cooler - Remove and Install
325C LCR Excavator Machine Systems Heater Core - Remove
330D and 336D Excavators Engine Oil and Filter - Change
324D Excavator Hydraulic System Oil Filter (Return) - Case Drain Filter
M318C and M322C Excavators Machine Systems Main Control Valve - Assemble
M318C and M322C Excavators Machine Systems Main Control Valve - Disassemble
M318C and M322C Excavators Machine Systems Main Control Valve - Install
M318C and M322C Excavators Machine Systems Main Control Valve - Remove
C9.3 Engines for Caterpillar Built Machines Lubrication System
323D Excavator Engine Oil Level - Check
330D and 336D Excavators Engine Oil Level - Check
M318C and M322C Excavators Machine Systems Gear Motor (Hydraulic Generator) - Assemble
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Alternator - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Control Valve - Disassemble
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Specifications
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Control Valve - Assemble
330C Excavator Fuel System - Prime
325D and 329D Excavators Specifications
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Radiator - Remove and Install
330D Material Handler Radiator Core - Clean
325C LCR Excavator Machine Systems Heater Core - Install
Installing the 271-1590 Temperature Control Kit (manual) on 300 Series Excavators{7309} Installing the 271-1590 Temperature Control Kit (manual) on 300 Series Excavators{7309}
330C Excavator Maintenance Interval Schedule
PL1000E Communication ECM General Information