Radiator Core - Clean
Show/hide table
Personal injury can result from air pressure. Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing. Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes. |
- Raise the engine hood and open the rear access door on the left side of the machine.
- Locate the radiator (1) .
Show/hide table
Illustration 1 | g01269318 |
- Check all of the core fins for debris.
- Remove dust and debris from all of the core fins.
Compressed air is preferred, but high pressure water or steam can be used to remove dust and general debris from a core.
See Special Publication, SEBD0518, "Know Your Cooling System" for more detailed information about cleaning core fins.
- Close the engine hood and close the rear access door.
Screens
Show/hide table
Illustration 2 | g01398048 |
- Remove 2 wing nuts (2) in order to remove screens (4) .
- Remove screens (3) and (4) .
- Remove dust and debris from the screens.
Compressed air is preferred, but high pressure water or steam can be used to remove dust and general debris from the screens.
- Install screens (3) and (4) .
- Install 2 wing nuts (2) .
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Radiator - Remove and Install
325D and 329D Excavators Specifications
330C Excavator Fuel System - Prime
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Control Valve - Assemble
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Specifications
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Control Valve - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Alternator - Remove and Install
325D and 329D Excavators Hydraulic System Gear Pump (Pilot)
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Hydraulic Oil Cooler - Remove and Install
325C LCR Excavator Machine Systems Heater Core - Remove
330D and 336D Excavators Engine Oil and Filter - Change
324D Excavator Hydraulic System Oil Filter (Return) - Case Drain Filter
325C LCR Excavator Machine Systems Heater Core - Install
Installing the 271-1590 Temperature Control Kit (manual) on 300 Series Excavators{7309} Installing the 271-1590 Temperature Control Kit (manual) on 300 Series Excavators{7309}
330C Excavator Maintenance Interval Schedule
PL1000E Communication ECM General Information
C11 and C13 Engines Valve Rocker Arm
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Muffler - Remove and Install
325C LCR Excavator Machine Systems Boom - Remove
C4.4 (Mech) Industrial Engine Starting Motor - Inspect
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Counterweight - Remove and Install
325D and 329D Excavators Hydraulic System Hydraulic Oil Cooler
AccuGrade® GPS (CD700) General Information
301.6C and 301.8C Mini Hydraulic Excavators Engine Supplement Engine - Remove and Install