Event Codes
电子控制模块(ECM)监测发动机运行状况,例如机油压力过低或冷却液温度过高。 如果运行状况超出正常状况,会生成一个事件代码。 事件代码会保持激活,直到状况回复正常。 ECM 也会记录该事件。 事件通常指机械问题而不是电子系统问题。
事件可能以警告、降额或停机的形式出现。 此应用下适用的事件可在本文档此章节内找到。
Show/hide table
图 1 | g01040769 |
典型模拟温度传感器的输出电压 |
图 1 显示了模拟传感器的典型输出电压。 如果输出信号电压在 4.2 VDC 和 4.8 VDC 之间,ECM 会生成一个事件代码。
监控系统
可以使用 Caterpillar 电子技师(ET)对某些监控系统参数编程。 可以启用或停用某些功能,对一些激发点进行设定。
请参阅故障诊断与排除, "系统配置参数"中关于监测系统参数的表,以了解各个可以编程的功能。
如果有事件发生,将会采取下列行动之一:
"警告" - 事件发生时,警告灯将持续点亮。
"减额" - 事件发生时警告灯将闪烁,发动机功率将减额。
"停机" - 事件发生时警告灯将闪烁,发动机将停机。
如果有多个减额为激活状态,所显示的减额将会是限制发动机功率最多的减额。
当选定监测系统参数编程为 "Off"(关闭)时,ECM 将不会在事件发生时采取任何行动。 例如,警告灯将不会点亮。
Caterpillar Information System:
3412C Engine Piston Ring Groove - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3412C Engine Water Temperature Regulator - Test
3306C Engines for Caterpillar Built Machines Charging System - Test
3512B Engine for SPF343, SPS343, and SPT343 Pumpers MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3126B Engines Pinion Clearance - Adjust
3512B Petroleum Engines with the ADEM 2 Electronic Control Module MID 036 - CID 0342 - FMI 07 Secondary Speed Sensor misinstalled
3512B Petroleum Engines with the ADEM 2 Electronic Control Module MID 036 - CID 0190 - FMI 07 Primary Speed Sensor misinstalled
3408E and 3412E Engines for Caterpillar Built Machines Cooling System - Test
325D and 329D Excavators Hydraulic System Check Valve (Load)
3126B Engines Piston Ring Groove - Inspect
3126B Engines Electric Starting System - Test
3306C Engines for Caterpillar Built Machines Battery - Test
3512 and 3516 EUI Engines for Caterpillar Built Machines General Information (Air/Electric Starting System)
325D and 329D Excavators Hydraulic System Accumulator (Pilot)
3412C Engine Vibration Damper - Check
2000/03/06 Service Charts and Decals Available {0374, 0375, 7405, 7557}
3612 and 3616 Engines Fuel Injection Control Linkage
3408C, 3412C and 3412D High Performance Marine Engines Pinion Clearance - Adjust
3612 and 3616 Engines Fuel Injector
3612 and 3616 Engines Fuel Injection Cycle
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Ignore Brake/Clutch Switch Circuit - Test
3612 and 3616 Engines Aftercooler