Housing (Front) - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 8T-9011     | 部件清洁剂     | 1     |
B     | 4C-9500     | 快速硫化底漆     | 1     |
C     | 1U-8846     | 密封垫密封胶     | 1     |
- 使用工具 (A) ,清洁前壳体 (4) 接合面。
Show/hide table
图 1 | g01153093 |
- 在接合面上涂抹工具 (B) 。 至少等待 3 到 5 分钟使底漆风干。
- 在接合面上涂抹工具 (C) 。 均匀地铺开密封胶。 必须在涂抹密封胶后十分钟以内安装前壳体 (4) 。
- 在缸体上定位前壳体 (4) 。
- 安装螺栓 (3) 和螺栓 (5) 。
- 安置发动机前支架 (2) 并安装螺栓 (1) 。
Show/hide table
图 2 | g01153092 |
End By:
- 安装单体喷油器液压泵。 请参阅 拆解和组装, "单体喷油器液压泵 - 安装"。
- 安装凸轮轴。 请参阅 拆解和组装, "凸轮轴 - 安装"。
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Housing (Front) - Remove
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
325C LCR Excavator Machine Systems Speed Control - Remove and Install
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
D Series Excavator Monitoring System Warning Operation
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
345B Series II Excavator Lifting and Tying Down the Machine
C7 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C7 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
325C LCR Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
3176C Engines for Caterpillar Built Machines E272 Inlet Air Restriction Warning
3524B Engines for Off-Highway Trucks E101 High Crankcase Pressure Warning
2012/02/09 The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
345B Series II Excavator Window Wiper and Washer Control
M325D Material Handler Machine Systems Stick - Install
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
345B Series II Excavator Cab Tilt Control - If Equipped
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System General Information
345B Series II Excavator Demolition Boom Removal - 345B L Ultrahigh Demolition Configuration
345C Excavator Tool Control System System 17: Joystick Slide Control - Calibrate
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install