Window Wiper and Washer Control
Excavator with Demolition Cab (If Equipped)
The top window of the demolition cab is equipped with one window wiper.
Show/hide table
Illustration 1 | g00722649 |
Switch for window washer |
Show/hide table
Illustration 2 | g00722323 |
Neutral Position (0) - The top window wiper is off.
Show/hide table
Left position - Turn the switch left in order to continuously activate the top window wiper. In this position, windshield washer fluid will not spray. |
Show/hide table
Right position - Turn the switch right in order to operate the intermittent function with spray. After the switch is turned, windshield washer fluid is sprayed on the top window. |
Note: In any position, the switch may be depressed in order to spray windshield washer fluid on the top window. In a demolition application, the additional water tank 18.6 L (4.9 US gal) is located in the battery compartment. Regularly check the water level in order to avoid scratching the top window.
Caterpillar Information System:
2012/02/09 The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
3524B Engines for Off-Highway Trucks E101 High Crankcase Pressure Warning
3176C Engines for Caterpillar Built Machines E272 Inlet Air Restriction Warning
325C LCR Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
C7 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Engines for Caterpillar Built Machines Housing (Front) - Remove
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
325C LCR Excavator Machine Systems Speed Control - Remove and Install
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
M325D Material Handler Machine Systems Stick - Install
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
345B Series II Excavator Cab Tilt Control - If Equipped
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System General Information
345B Series II Excavator Demolition Boom Removal - 345B L Ultrahigh Demolition Configuration
345C Excavator Tool Control System System 17: Joystick Slide Control - Calibrate
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
345B Series II Excavator Demolition Boom Installation - 345B L Series II Ultrahigh Demolition Configuration
301.6C and 301.8C Mini Hydraulic Excavators Machine System Specifications Main Hydraulic Pump
345B Series II Excavator Expandable Pin - Tighten - If Equipped
345B Series II Excavator Demolition Boom Installation
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Machine System Specifications Boom Cylinder