Temperature Sensor (Cab Air) - Remove and Install
Removal Procedure
Start By:
- Remove the seat support. Refer to Disassembly and Assembly, "Seat Support - Remove and Install".
- Remove plate (1) and position floor mat (2) to the forward position.
Show/hide table
 | |
| Illustration 1 | g01153109 |
- Remove bolts (3) .
Show/hide table
 | |
| Illustration 2 | g01153110 |
- Remove cover (4) .
Show/hide table
 | |
| Illustration 3 | g01153111 |
- Disconnect harness assemblies (5) .
Show/hide table
 | |
| Illustration 4 | g01153112 |
- Remove duct (6). Remove plate (7) and harness assembly (8) .
Show/hide table
 | |
| Illustration 5 | g01153114 |
- Remove vents (9) .
Show/hide table
 | |
| Illustration 6 | g01153115 |
- Remove screws (10) and duct (11) .
Show/hide table
 | |
| Illustration 7 | g01153116 |
- Remove screw (12) and duct (13). Duct (13) is located below duct (11). Refer to illustration 7.
Show/hide table
 | |
| Illustration 8 | g01153117 |
- Remove bolts (14) in order to remove air distribution assembly (15). Remove support assembly (16) .
Show/hide table
 | |
| Illustration 9 | g01153118 |
- Remove air filter (17) .
Show/hide table
 | |
| Illustration 10 | g01153119 |
- Disconnect harness assembly (18). Remove cab temperature sensor (19) from cable straps (20). Remove temperature sensor (19) .
Show/hide table
 | |
| Illustration 11 | g01153120 |
Installation Procedure
- Install temperature sensor (19) and cable straps (20). Connect harness assembly (18) .
Show/hide table
| | |
| Illustration 12 | g01153120 |
- Install air filter (17) .
Show/hide table
| | |
| Illustration 13 | g01153119 |
- Install support assembly (16). Install air distribution assembly (15). Install bolts (14) .
Show/hide table
| | |
| Illustration 14 | g01153118 |
- Install duct (13) and screw (12) .
Show/hide table
| | |
| Illustration 15 | g01153117 |
- Install duct (11) and screws (10) .
Show/hide table
| | |
| Illustration 16 | g01153116 |
- Install vents (9) .
Show/hide table
| | |
| Illustration 17 | g01153115 |
- Install harness assembly (8) and plate (7). Install duct (6) .
Show/hide table
| | |
| Illustration 18 | g01153114 |
- Connect harness assemblies (5) .
Show/hide table
| | |
| Illustration 19 | g01153112 |
- Install cover (4) .
Show/hide table
| | |
| Illustration 20 | g01153111 |
- Install bolts (3) .
Show/hide table
| | |
| Illustration 21 | g01153110 |
- Position floor mat (2) in the rear position and install plate (1) .
Show/hide table
| | |
| Illustration 22 | g01153109 |
End By: Install the seat support. Refer to Disassembly and Assembly, "Seat Support - Remove and Install".
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Engines for Caterpillar Built Machines Housing (Front) - Remove
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
325C LCR Excavator Machine Systems Speed Control - Remove and Install
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
D Series Excavator Monitoring System Warning Operation
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
345B Series II Excavator Lifting and Tying Down the Machine
C7 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
3176C Engines for Caterpillar Built Machines E272 Inlet Air Restriction Warning
3524B Engines for Off-Highway Trucks E101 High Crankcase Pressure Warning
2012/02/09 The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
345B Series II Excavator Window Wiper and Washer Control
M325D Material Handler Machine Systems Stick - Install
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
345B Series II Excavator Cab Tilt Control - If Equipped
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System General Information
345B Series II Excavator Demolition Boom Removal - 345B L Ultrahigh Demolition Configuration
345C Excavator Tool Control System System 17: Joystick Slide Control - Calibrate
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
345B Series II Excavator Demolition Boom Installation - 345B L Series II Ultrahigh Demolition Configuration