Vibration Damper and Pulley - Remove and Install
拆卸步骤
- 卸下驱动皮带 (1) 。
Show/hide table
图 1 | g01152990 |
- 从曲轴皮带轮拆卸螺栓 (3) 和曲轴减振器 (2) 。
- 拆下螺栓 (4) 和垫圈 (5) 。
- 拆下曲轴皮带轮。
安装步骤
- 在曲轴上定位曲轴皮带轮。 安置垫圈 (5) 并安装螺栓 (4) 。 拧紧螺栓 (4) 至扭矩为 200 ± 25 N·m (148 ± 18 lb ft)。
Show/hide table
图 2 | g01152990 |
- 安装曲轴减振器 (2) 和螺栓 (3) 。
- 安装驱动皮带 (1) 。
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
D Series Excavator Monitoring System General Information
D Series Excavator Monitoring System Prestart Monitoring Function
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Reference Material
D Series Excavator Monitoring System Data Link
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Tip - Inspect/Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Plates - Inspect/Replace
325C LCR Excavator Hydraulic System Main Control Valve
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Inspect
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Check
D Series Excavator Monitoring System Input Components
345B Series II Excavator Lifting and Tying Down the Machine
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
D Series Excavator Monitoring System Warning Operation
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
325C LCR Excavator Machine Systems Speed Control - Remove and Install
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
C7 Engines for Caterpillar Built Machines Housing (Front) - Remove
C7 Engines for Caterpillar Built Machines Housing (Front) - Install
325C LCR Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install