Prestart Monitoring Function
将发动机启动开关转到 ON 位置。 大约一秒钟后，屏幕上出现 CAT 标志并且报警指示灯亮起。 现在将指示冷却液温度, 液压油温度, 燃油油位 和 发动机转速刻度盘的位置。
注: 操纵手柄的控制模式将在显示屏的底部显示三秒钟。 此功能仅适用于电子操纵手柄系统。
发动机起动前，监视器系统检查发动机冷却液, 发动机机油 和 液压油的级别。 如果液位检查时探测到某一个液位过低，则相应的信息将显示出来，并且有图象文字指示那个过低的液位。
注: 如果不止一处液位过低，警告信息指示器右下区域将指示向右键符号和向左键符号。 按向右键 (9) 或向左键 (12) 以查看指示的警告消息。 在发动机起动五秒钟后，低液位指示器将消失。
注: 当机器在斜坡上时不能进行准确的液位检查。 应在平地上进行液位检查。
如果液位检查期间起动了发动机，监控器将取消这些检查。
首先应检查滤清器的工作小时数。 然后检查液体的工作小时数。 如果滤清器或液体超过建议的更换间隔时间，显示屏上将出现 "CHECK FLTR/FLUID INFO（检查滤清器/油液信息）"。 请参阅 "MAIN MENU（主菜单）"以了解更多信息。
Caterpillar Information System:
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Reference Material
D Series Excavator Monitoring System Data Link
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Tip - Inspect/Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Plates - Inspect/Replace
325C LCR Excavator Hydraulic System Main Control Valve
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Inspect
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Check
D Series Excavator Monitoring System Input Components
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Jaw - Repair
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Hub Nut - Check/Tighten - Measuring the Upper Jaw Side to Side (Axial) Movement
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Gear and Bearing - Lubricate
D Series Excavator Monitoring System General Information
C7 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C7 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
345B Series II Excavator Lifting and Tying Down the Machine
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
D Series Excavator Monitoring System Warning Operation
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
325C LCR Excavator Machine Systems Speed Control - Remove and Install
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install