Flywheel Housing - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7573 | 连杆支架 | 2 |
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将工具 (A) 和适当的起吊设备连接到飞轮壳 (1) 上。 飞轮壳 (1) 的重量约为 25 kg (55 lb)。
Show/hide table
 | |
| 图 1 | g01152919 |
- 拆下螺栓 (2) 和螺栓 (3) 。
- 卸下将发动机油底壳固定在飞轮壳体 (1) 上的螺栓 (4) 。 拆下飞轮壳 (1) 。
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7573 | 连杆支架 | 2 |
| B | 1U-8846 | 密封胶 | - |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装之前先在飞轮壳整个安装面上涂抹工具 (B) 。
- 将工具 (A) 和适当的起吊设备连接到飞轮壳 (1) 上。 飞轮壳 (1) 的重量约为 25 kg (55 lb)。 将飞轮壳体安置在缸体上。 安装用来将发动机油底壳固定到飞轮壳上的螺栓 (4) 。
Show/hide table
| | |
| 图 2 | g01152919 |
- 安装螺栓 (2) 和螺栓 (3) 。
- 检查飞轮壳跳动。 请参阅测试和调整, "飞轮壳 - 检查"。
End By: 安装飞轮。 请参阅 拆解和组装, "飞轮 - 安装"。
Caterpillar Information System:
D Series Excavator Monitoring System General Information
D Series Excavator Monitoring System Prestart Monitoring Function
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Reference Material
D Series Excavator Monitoring System Data Link
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Tip - Inspect/Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Wear Plates - Inspect/Replace
325C LCR Excavator Hydraulic System Main Control Valve
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Replace
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Inspect
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Rotator Head Bolts - Check
D Series Excavator Monitoring System Input Components
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition and Scrap Shears Jaw - Repair
C7 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
345B Series II Excavator Lifting and Tying Down the Machine
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
D Series Excavator Monitoring System Warning Operation
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
325C LCR Excavator Machine Systems Speed Control - Remove and Install
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
C7 Engines for Caterpillar Built Machines Housing (Front) - Remove
C7 Engines for Caterpillar Built Machines Housing (Front) - Install