Housing (Front) - Remove
拆卸步骤
开始:
- 拆下凸轮轴。 请参考拆解和组装, "凸轮轴 - 拆卸"。
- 拆下单体喷油器液压泵。 请参阅拆解和组装, "单体喷油器液压泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 支撑起发动机前部的重量。 从发动机支架 (2) 拆下螺栓 (1) 。
Show/hide table
 | |
| 图 1 | g01153092 |
- 拆下螺栓 (3) 和螺栓 (5) 。 拆下前壳体 (4) 。
Show/hide table
 | |
| 图 2 | g01153093 |
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Front Cover - Remove and Install
325C LCR Excavator Machine Systems Speed Control - Remove and Install
GSH9B, GSH15B and GSH20B Orange Peel Grapples Approved Machines
GSH9B, GSH15B and GSH20B Orange Peel Grapples Reference Material
2005/05/02 The Hydraulic Lift Cylinder Has Been Improved {5362}
302.5C Mini Hydraulic Excavator Machine System Specifications Boom Cylinder
D Series Excavator Monitoring System Warning Operation
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines CAN Extension Bridge
345B Series II Excavator Lifting and Tying Down the Machine
C7 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C7 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
D Series Excavator Monitoring System General Information
C7 Engines for Caterpillar Built Machines Housing (Front) - Install
325C LCR Excavator Machine Systems Temperature Sensor (Cab Air) - Remove and Install
3176C Engines for Caterpillar Built Machines E272 Inlet Air Restriction Warning
3524B Engines for Off-Highway Trucks E101 High Crankcase Pressure Warning
2012/02/09 The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
345B Series II Excavator Window Wiper and Washer Control
M325D Material Handler Machine Systems Stick - Install
C7 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
345B Series II Excavator Cab Tilt Control - If Equipped
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System General Information
345B Series II Excavator Demolition Boom Removal - 345B L Ultrahigh Demolition Configuration
345C Excavator Tool Control System System 17: Joystick Slide Control - Calibrate