General Information (Lubrication System)
One of the problems in the list that follows will generally be an indication of a problem in the lubrication system for the engine.
- Too Much Oil Consumption
- Low Oil Pressure
- High Oil Pressure
- Too Much Bearing Wear
- Increased Oil Temperature
Caterpillar Information System:
3406E and C15 Marine Engines Turbocharger - Disassemble
G3520B Industrial Engines Camshaft Timing
2000/01/01 New Electronic Control (Detonation Mixing Control Module) Eliminates Erroneous Shutdown Codes {1901}
2000/01/01 New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability {1100}
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application Remote PTO Accelerator Position Sensor Circuit - Test
G3500 Engines Valve Lash and Valve Bridge Adjustment
G3500B Engines Exhaust Bypass Valve - Adjust
G3500B Engines Measuring Inlet Manifold Temperature
G3500B Engines Engine Speed/Timing Sensor
G3500B Engines Detonation Sensor
G3500B Engines Manifold Air Pressure Sensor
2000/02/01 Reporting Incidents ThroughThe Cat Neutral Net {0353, 0373}
G3500B Engines Measuring Engine Oil Pressure
3500 Industrial Engines Cylinder Block
3126B Engines for Caterpillar Built Machines Unit Injector - Install
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI) - Adjust
723PLUS Digital Speed Control Introduction
723PLUS Digital Speed Control Declaration of Incorporation
G3304 and G3306 Engines Test Tools for the Electrical System
723PLUS Digital Speed Control Application
3512 Industrial Engine Flywheel
3176C Industrial Engine Fan Drive - Remove
3176C Industrial Engine Fan Drive - Install
2000/01/01 New Shafts In Water Pump Groups Provide Increased Torsional Strength {1361, 1389}