Turbocharger - Disassemble
拆解步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g01162399 |
- 将涡轮增压器安置在工作台上。
- 将对齐标记置于压缩机壳 (1) 、涡轮增压器芯 (4) 和涡轮机壳 (3) 上。
- 从压缩机壳 (1) 上拆下螺栓 (2) 。
- 从涡轮增压器芯 (4) 上拆下压缩机壳 (1) 。
- 从涡轮机壳 (3) 上拆下螺栓 (2) 。
- 从涡轮增压器芯 (4) 上拆下涡轮机壳 (3) 。
- 检查所有部件的状况。 使用新部件替换磨损或损坏的部件。
Show/hide table
注意 |
---|
请勿尝试拆解涡轮增压器芯组件或废气旁通阀。 请勿拆下压缩机叶轮。 涡轮增压器芯组件和废气旁通阀不能在现场进行维护,应作为整体进行更换。 |
Caterpillar Information System:
G3520B Industrial Engines Camshaft Timing
2000/01/01 New Electronic Control (Detonation Mixing Control Module) Eliminates Erroneous Shutdown Codes {1901}
2000/01/01 New Basic Cylinder Head Groups Include Premachined Valve Seat Inserts For Improved Reliability {1100}
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application Remote PTO Accelerator Position Sensor Circuit - Test
G3500 Engines Valve Lash and Valve Bridge Adjustment
G3500B Engines Exhaust Bypass Valve - Adjust
G3500B Engines Measuring Inlet Manifold Temperature
G3500B Engines Engine Speed/Timing Sensor
G3500B Engines Detonation Sensor
G3500B Engines Manifold Air Pressure Sensor
2000/02/01 Reporting Incidents ThroughThe Cat Neutral Net {0353, 0373}
G3500B Engines General Information (Electronic Control System)
3500 Engines For Caterpillar Built Power Modules General Information (Lubrication System)
G3500B Engines Measuring Engine Oil Pressure
3500 Industrial Engines Cylinder Block
3126B Engines for Caterpillar Built Machines Unit Injector - Install
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI) - Adjust
723PLUS Digital Speed Control Introduction
723PLUS Digital Speed Control Declaration of Incorporation
G3304 and G3306 Engines Test Tools for the Electrical System
723PLUS Digital Speed Control Application
3512 Industrial Engine Flywheel
3176C Industrial Engine Fan Drive - Remove
3176C Industrial Engine Fan Drive - Install