Water Temperature Regulator and Housing - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-0510 | 起子总成 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
 | |
| 图 1 | g00641731 |
- 使用工具 (A) 在水温调节器壳体 (2) 内安装密封件 (5) 。 安装每个密封件，使其唇口朝向水温调节器壳体内部。 将每个密封件安装在孔径的底部。 将皂液涂在密封件唇口上。
- 确保水温调节器壳体 (2) 的配合面清洁。 将水温度调节器 (4) 安装在水温调节器壳体内。
- 确保适配器 (3) 的配合面清洁。 安装新密封垫。 将适配器 (3) 和水温度调节器壳体 (2) 固定在一起。
- 确保适配器 (1) 的配合面清洁。 安装新密封垫。 将适配器 (1) 固定至水温度调节器壳体 (2) 上。
End By: 安装水温调节器壳体。
Caterpillar Information System:
3054B Industrial Engine Cylinder Block
G3606 and G3608 Engines Water Temperature Regulator and Housing - Disassemble
C-9 Engines for Caterpillar Built Machines Electrical System
C-9 Engines for Caterpillar Built Machines Cooling System
3056E Industrial Engine Electric Starting Motor
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Install
Caterpillar Monitoring System for Electronic Modular Control Panel Sensor Dynamic Test
3054B Industrial Engine Engine Oil Relief Valve
3054B Industrial Engine Air Inlet Heater
C-9 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
3612 and 3616 Engines Cylinder Head - Disassemble
C-9 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
3512B Marine Auxiliary Engine Generator Oil - Change
3114, 3116, and 3126 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
G3606 and G3608 Engines Water Temperature Regulator and Housing - Install
3612 and 3616 Engines Cylinder Head - Assemble
3512B Marine Auxiliary Engine Generator Oil Filter - Change
3512B Marine Auxiliary Engine Generator Oil Filter Indicator - Check
3512B Marine Auxiliary Engine Generator Oil Level - Check
Caterpillar Monitoring System for Electronic Modular Control Panel Module - Replace
Battery Test Procedure {1401} Battery Test Procedure {1401}
C-9 Engines for Caterpillar Built Machines Injection Actuation Oil Temperature Sensor
3054 and 3056 Industrial and Generator Set Engines Engine Oil Pressure
Caterpillar Monitoring System for Electronic Modular Control Panel Main Display Module Initialization - Adjust