3054 and 3056 Industrial and Generator Set Engines Caterpillar


Engine Oil Pressure

Usage:

3056 1ML
环境温度为 18 至 20°C (64 至 68°F) 时低怠速下的最小机油压力值如下: ... 62 kPa (9 psi)

正常工作温度时高怠速下的最小机油压力值如下:

自然进气式发动机 ... 207 kPa (30 psi)
涡轮增压式发动机 ... 280 kPa (40 psi)

Caterpillar Information System:

C-9 Engines for Caterpillar Built Machines Injection Actuation Oil Temperature Sensor
Battery Test Procedure {1401} Battery Test Procedure {1401}
Caterpillar Monitoring System for Electronic Modular Control Panel Module - Replace
3512B Marine Auxiliary Engine Generator Oil Level - Check
3512B Marine Auxiliary Engine Generator Oil Filter Indicator - Check
3512B Marine Auxiliary Engine Generator Oil Filter - Change
3612 and 3616 Engines Cylinder Head - Assemble
G3606 and G3608 Engines Water Temperature Regulator and Housing - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
3512B Marine Auxiliary Engine Generator Oil - Change
G3606 and G3608 Engines Water Temperature Regulator and Housing - Assemble
3054B Industrial Engine Cylinder Block
Caterpillar Monitoring System for Electronic Modular Control Panel Main Display Module Initialization - Adjust
Caterpillar Monitoring System for Electronic Modular Control Panel Harness Code - Troubleshoot
Caterpillar Monitoring System for Electronic Modular Control Panel System Self Test
Caterpillar Monitoring System for Electronic Modular Control Panel Electrical Connector - Inspect
Caterpillar Monitoring System for Electronic Modular Control Panel Glossary of Terms
Caterpillar Monitoring System for Electronic Modular Control Panel Connector Contact Description of Main Display Module
Caterpillar Monitoring System for Electronic Modular Control Panel LH/RH Switch - Troubleshoot
3054B Industrial Engine Water Pump
3054B Industrial Engine Piston and Rings
3114, 3116, and 3126 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3054B Industrial Engine Connecting Rod
C-9 Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.