3126B Truck Engine Caterpillar

Belt Tensioner - Remove and Install

Usage:

3126 6PZ

Removal Procedure

Show/hide table




Illustration 1	g00614167
Typical Example

Use a breaker bar to release the tension on belt tensioner (2). Remove the drive belt.

Remove four bolts (1) and belt tensioner (2) .

Installation Procedure

Show/hide table




Illustration 2	g00614167
Typical Example

Position belt tensioner (2) on the cylinder block. Install four bolts (1) .

Install the drive belt. Use a breaker bar to place the original amount of tension on the drive belt.

Caterpillar Information System:

3606 and 3608 Engines Engine Oil Coolers - Remove

3126B Truck Engine Idler Pulley - Install

3126B Truck Engine Idler Pulley - Remove

Caterpillar Monitoring System for Electronic Modular Control Panel Normal Mode

EMCPII+ for Gas Engines Data Link

EMCPII+ for Gas Engines Component Location

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines General Information

EMCPII+ for Gas Engines System Communication Module (Customer)

3612 and 3616 Engines Water Pump - Install - Jacket Water Pump

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Customer Interface Module

SR4 HV and SR4B HV Generators Parallel Operation

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Synchronizing Lights Module

3126B Truck Engine Fan Drive - Remove

C9 Engine For Caterpillar Built Machines Engine Oil Filter Base - Remove

3126B Truck Engine Fan Drive - Install

3126B Truck Engine Air Compressor - Remove and Install

G3304 and G3306 Engines Turbocharger

C9 Engine For Caterpillar Built Machines Engine Oil Filter Base - Install

3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Sensors and Electrical Connectors

3606 and 3608 Engines Engine Oil Coolers - Install

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines General Information

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Service Tools

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Fault Identification

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Troubleshooting Diagnostic Codes