Stick Bearings and Seals - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 9U-5337     | 轴承拆卸工具适配器     | 1     |
4C-9634 | 拉拔器螺柱     | 1     | |
9U-6832 | 螺母     | 1     | |
4K-0684 | 硬垫圈     | 1     | |
6V-3175 | 双作用油缸     | 1     | |
3S-6224 | 电动液压泵 (115 V) (1)     | 1     | |
6D-7726 | 软管组件     | 2     | |
9U-5266 | 接收套筒     | 1     | |
B     | 9U-5338     | 轴承拆卸工具适配器     | 1     |
4C-9634 | 拉拔器螺柱     | 1     | |
9U-6832 | 螺母     | 1     | |
4K-0684 | 硬垫圈     | 1     | |
6V-3175 | 双作用油缸     | 1     | |
3S-6224 | 电动液压泵 (115 V) (1)     | 1     | |
6D-7726 | 软管组件     | 2     | |
9U-5266 | 接收套筒     | 1     |
Show/hide table
( 1 ) | 8S-8033 电动液压泵 (230 v) 可用。 |
开始:
- 拆下斗杆。 请参阅拆解和组装, "斗杆 - 拆卸"。
注: 要从位于铲斗控制连杆机构的销接头处的斗杆拆下套筒轴承,请参阅拆解和组装, "铲斗连杆轴承和油封 - 拆卸"。
- 将唇形密封 (1) 从动臂上的斗杆销孔中拆下。
Show/hide table
图 1 | g00592359 |
- 使用工具 (A) 拆下套筒轴承。
Show/hide table
图 2 | g00592391 |
- 重复进行步骤 1 和 2,以便从斗杆的另一侧拆下唇型密封和套筒轴承。
- 将唇形密封 (2) 从斗杆上的铲斗销孔中拆下。
Show/hide table
图 3 | g00604131 |
- 使用工具 (B) 拆下套筒轴承。
Show/hide table
图 4 | g00687381 |
- 重复进行步骤 4 和 5,以便从斗杆的另一侧拆下唇型密封和套筒轴承。
Caterpillar Information System:
2000/03/20 Improved Exhaust Manifolds {1059}
320C Excavator Machine Systems Bucket - Install
320C Excavator Fuses - Replace
325C and 325C L Excavator Fuel Tank Water and Sediment - Drain
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
325D and 329D Excavators Fuel Tank Cap and Strainer - Clean
2000/03/20 New Bolts and Torque for Securing the TOPS {7325}
2000/04/24 The Reliability of the Window Washers is Increased {7306}
2000/06/19 New Pump Drive Is Used To Improve Service Life {3108}
315C Excavator Fuel System Primary Filter (Water Separator) Element - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Using Service Mode
320C Excavator Fuel System Water Separator - Drain
303.5 Mini Hydraulic Excavator Recoil Spring
320C Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 05 Throttle Lock Lamp open circuit
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 06 Throttle Lock Lamp short
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0650 - FMI 12 Harness Code invalid
318C and 319C Excavators Hydraulic System Oil - Change
3524B Engines for 797 and 797B Off-Highway Trucks General Information (Fuel System) - Diesel
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Remove
2000/04/17 A Worksheet Is Provided for Testing and Adjusting Procedures {4350, 5050}
3054 Engine Compression - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Install
303.5 Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble