3524B Engines for 797 and 797B Off-Highway Trucks Caterpillar


General Information (Fuel System) - Diesel

Usage:

3524B 1AW
Terlalu banyak bahan bakar atau kurangnya bahan bakar untuk pembakaran dapat menjadi penyebab permasalahan dalam sistem bahan bakar. Pekerjaan seringkali dilakukan pada sistem bahan bakar ketika permasalahan muncul pada beberapa komponen engine. Adalah sulit untuk mencari penyebab permasalahan, khususnya sewaktu asap keluar dari saluran gas buang. Asap yang keluar dari saluran gas buang dapat disebabkan oleh injektor bahan bakar yang tidak berfungsi. Asap juga dapat disebabkan oleh salah satu atau lebih dari satu alasan berikut:

  • Kurangnya udara untuk melakukan pembakaran yang baik.

  • Pembebanan berlebih pada ketinggian tempat (altitudo) yang tinggi

  • Kebocoran oli ke dalam ruang pembakaran

  • Kebocoran lubang pemasukan udara dan kebocoran gas buang

  • Kurangnya kompresi

Caterpillar Information System:

318C and 319C Excavators Hydraulic System Oil - Change
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0650 - FMI 12 Harness Code invalid
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 06 Throttle Lock Lamp short
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0548 - FMI 05 Throttle Lock Lamp open circuit
320C Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
303.5 Mini Hydraulic Excavator Recoil Spring
320C Excavator Machine Systems Stick Bearings and Seals - Remove
2000/03/20 Improved Exhaust Manifolds {1059}
320C Excavator Machine Systems Bucket - Install
320C Excavator Fuses - Replace
325C and 325C L Excavator Fuel Tank Water and Sediment - Drain
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders MID 036 - CID 0298 - FMI 02 Incorrect Service Brake Pedal Switch inputs
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Remove
2000/04/17 A Worksheet Is Provided for Testing and Adjusting Procedures {4350, 5050}
3054 Engine Compression - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Install
303.5 Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Remove
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Install
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Adjust Clock Mode
320C Excavator Machine Systems Swivel - Remove
320C Excavator Hydraulic System Oil Filter (Pilot) - Replace
320C Excavator Machine Systems Bucket Linkage - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Switch Status Mode
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.