Air Compressor - Remove and Install
拆卸步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连接支架     | 1     |
Show/hide table
不要断开空气管路,直到系统中的空气压力为零。 如果在压力下断开软管的话,可能会造成人身伤害。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 排出空气罐中的空气压力。
- 从冷却系统排干冷却液。 请参阅操作和保养手册, "加注容量和建议"。
- 从液压泵 (10) 上断开软管组件。
Show/hide table
图 1 | g01142984 |
Show/hide table
图 2 | g01142985 |
- 拆下螺栓 (9) 和液压泵 (10) 。
- 断开软管组件 (1) 、 (2) 、 (3) 和 (5) 。
- 在空气压缩机 (6) 上固定工具 (A) 和适当的提升装置。 空气压缩机 (6) 的重量约为 27 kg (60 lb)。
- 拆下螺栓 (7) 和 (8) 。
- 拆下螺栓 (4) 。
- 拆下空气压缩机 (6) 和密封垫。
安装步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连接支架     | 1     |
B     | 9S-3263     | 螺纹锁固胶     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在空气压缩机 (6) 上固定工具 (A) 和适当的提升装置。 空气压缩机 (6) 的重量约为 27 kg (60 lb)。
Show/hide table
图 3 | g01142984 |
Show/hide table
图 4 | g01142985 |
- 在前壳体中定位密封垫和空气压缩机 (6) 。
- 在螺栓 (4) 的螺纹上涂抹工具 (B) 。 安装螺栓 (4) 。
注: 螺栓 (4) 安装时必须先于螺栓 (7) 和 (8) 。
- 安装螺栓 (7) 和 (8) 。
- 连接软管组件 (1) 、 (2) 、 (3) 和 (5) 。
- 定位液压泵 (10) 并安装螺栓 (9) 。
- 在液压泵 (10) 上连接软管组件。
- 向冷却系统加注冷却液到正确的液位。 请参阅操作和保养手册, "加注容量和建议"。
Caterpillar Information System:
3612 and 3616 Engines Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines Unit Injector Misfire
3126B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116 and 3126 Engines Soot in Inlet Manifold
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C9 Engine For Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3126B Truck Engine Unit Injector - Install
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
3034 Industrial Engine Fuel Lines
SR4B Generators Insulation - Test
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
3114, 3116 and 3126 Engines Valve Train Noise
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI) - Assemble
3114, 3116 and 3126 Engines Unit Injector
3612 and 3616 Engines Piston and Connecting Rods - Install
SR4B Generators Service Tools
G3612 and G3616 Engines Cylinder Liner - Remove
G3612 and G3616 Engines Cylinder Liner - Install
SR4B Generators Coupling - Install
G3612 and G3616 Engines Camshaft - Remove
On-Highway Engines Electronic PTO Installation and Application Guide PTO Parameters - Program
3126B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3612 and G3616 Engines Camshaft - Install