Inlet and Exhaust Valve Guides - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1U-7793     | 气门导管冲头     | 1     |
B     | 9U-6895     | 气门导管冲头     | 1     |
开始:
- 拆下进气门和排气门。 请参阅拆解和组装, "进气与排气阀 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 利用工具 (A) 将进气门导管 (2) 从缸盖组件上拆下。 利用工具 (B) 将排气门导管 (1) 从缸盖组件上拆下。
Show/hide table
图 1 | g01029395 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1U-7793     | 气门导管冲头     | 1     |
B     | 9U-6895     | 气门导管冲头     | 1     |
C     | 1U-7792     | 导向圈     | 1     |
D     | 149-4008     | 导向圈     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 定位进气门导管 (2) 并敲打进气门导管 (2) 的顶部。
Show/hide table
图 2 | g01029395 |
- 利用工具 (A) 和 (C) 安装进气门导管 (2) 。 安装进气门导管 (2) ,直到凸出缸盖组件 23.0 ± 0.5 mm (0.90 ± 0.02 in) 为止。
- 利用工具 (B) 和 (D) 安装排气门导管 (1) 。 安装排气门导管 (1) ,直到凸出缸盖组件 17.8 ± 0.5 mm (0.70 ± 0.02 in) 为止。
End By: 安装进气门和排气门。 请参阅 拆解和组装, "进气与排气阀 - 拆卸和安装"。
Caterpillar Information System:
3114, 3116 and 3126 Engines Soot in Inlet Manifold
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C9 Engine For Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3126B Truck Engine Unit Injector - Install
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
3034 Industrial Engine Fuel Lines
SR4B Generators Insulation - Test
3126B Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
3126B Engines for Caterpillar Built Machines Engine Oil Cooler - Install
3126B Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
G3304 and G3306 Engines Cylinder Head Valves
3114, 3116 and 3126 Engines Unit Injector Misfire
3612 and 3616 Engines Piston Cooling Jets - Remove and Install
C9 On-Highway Truck Engines Air Compressor - Remove and Install
3114, 3116 and 3126 Engines Valve Train Noise
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI) - Assemble
3114, 3116 and 3126 Engines Unit Injector
3612 and 3616 Engines Piston and Connecting Rods - Install
SR4B Generators Service Tools
G3612 and G3616 Engines Cylinder Liner - Remove
G3612 and G3616 Engines Cylinder Liner - Install
SR4B Generators Coupling - Install
G3612 and G3616 Engines Camshaft - Remove