Cab - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 4     |
- Use Tooling (A) to attach the suitable lifting straps on the top of the cab assembly.
Show/hide table
Illustration 1 | g00550917 |
- Disconnect electrical connector (1) behind the right side console.
Show/hide table
Illustration 2 | g00550936 |
- Remove two screws (2) and plastic cover (3) .
Show/hide table
Illustration 3 | g00551028 |
- Remove two bolts (4) and washers from the cab assembly.
Show/hide table
Illustration 4 | g00550963 |
- Remove two bolts (5) and washers.
Show/hide table
Illustration 5 | g00550969 |
- Remove the cab assembly from the upper structure with the suitable lifting straps. Weight of the cab assembly is 200 kg (440 lb).
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 4     |
- Use Tooling (A) to attach the suitable lifting straps on the top of the cab assembly. Place the cab assembly on the upper structure. Weight of the cab assembly is 200 kg (440 lb). Be sure that the mounting holes in the cab assembly are aligned with the mounting holes in the upper structure.
Show/hide table
Illustration 6 | g00550917 |
- Install washers and two bolts (5) to the cab assembly. Tighten bolts to a torque of 80 ± 15 N·m (59 ± 11 lb ft).
Show/hide table
Illustration 7 | g00550969 |
- Install washers and two bolts (4) to the cab assembly. Tighten bolts to a torque of 80 ± 15 N·m (59 ± 11 lb ft).
Show/hide table
Illustration 8 | g00550963 |
- Install plastic cover (3) with two screws (2) .
Show/hide table
Illustration 9 | g00551028 |
- Connect electrical connector (1) behind the right side console.
Show/hide table
Illustration 10 | g00550936 |
Caterpillar Information System:
312B Excavator Machine Systems Travel Motor - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Install
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
302.5 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Service Meter Mode
302.5 Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
S3 Shear and CR3 Crusher Cutting Arm
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Assemble
302.5 Mini Hydraulic Excavator Machine Systems Track Adjuster - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Track Adjuster - Assemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Install
302.5 Mini Hydraulic Excavator Machine Systems Recoil Spring - Remove
302.5 Mini Hydraulic Excavator Machine Systems Recoil Spring - Disassemble