Travel Motor - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
(A)     | 154-9327     | Pliers     | 1     |
(B)     | 9S-9152     | Pulling Attachment     | 1     |
Start By:
- Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove" in this manual.
- Remove rotary assembly (1) from motor housing (2) .
Show/hide table
Illustration 1 | g00542249 |
- Remove control unit (3) from motor housing (2) .
Show/hide table
Illustration 2 | g00542250 |
- Use Tooling (A) to remove swash plate (4). Remove piston rod (5) .
Show/hide table
Illustration 3 | g00542322 |
- Remove shaft (6) from motor housing (2) .
Show/hide table
Illustration 4 | g00542323 |
- Use Tooling (B) to remove bearing (7) from shaft (6) .
Show/hide table
Illustration 5 | g00542324 |
- Remove four bolts (8). Remove block assembly (9) from motor housing (2) .
Show/hide table
Illustration 6 | g00542325 |
- Remove pilot valve (10) from block assembly (9) .
Show/hide table
Illustration 7 | g00542326 |
- Use the correct retaining ring pliers in order to remove retaining ring (11). Remove seal (12) from the motor housing (2) .
Show/hide table
Illustration 8 | g00542327 |
- Remove cradles (13) from motor housing (2) .
Show/hide table
Illustration 9 | g00542329 |
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Install
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
302.5 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Service Meter Mode
302.5 Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
S3 Shear and CR3 Crusher Cutting Arm
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Assemble
302.5 Mini Hydraulic Excavator Machine Systems Track Adjuster - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Track Adjuster - Assemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Install
302.5 Mini Hydraulic Excavator Machine Systems Recoil Spring - Remove