302.5 Mini Hydraulic Excavator Machine Systems Caterpillar


Fuel Tank - Remove

Usage:

302.5 4AZ

Removal Procedure

Start By:

  1. Drain the fuel tank. Refer to Operation and Maintenance, SEBU7203, "Fuel Tank Water and Sediment - Drain".

------ WARNING! ------

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up fuel spills immediately.

----------------------


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.


Note: Put identification marks on all lines for installation purposes. Plug all lines. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.




    Illustration 1g00551301

  1. Unlock the lock (1) .

  1. Open the fuel tank access cover.



    Illustration 2g00551322

  1. Remove two bolts (2) and washers.

  1. Remove fuel tank access cover (3) .



    Illustration 3g00551324

  1. Remove bolt (4) and the washer.

  1. Remove battery cover (5) .



    Illustration 4g00551326

  1. Remove two bolts (6) and washers.



    Illustration 5g00551332

  1. Remove bolt (7) and the washer.

  1. Remove right side support assembly (8) .



    Illustration 6g00551340

  1. Disconnect electrical connector (9) .

  1. Loosen clamps (10) and remove hoses aside.



    Illustration 7g00557547

  1. Remove two bolts (11), two nuts (12), and washers from the bottom of the fuel tank.



    Illustration 8g00551348

  1. Remove fuel tank (13) from the machine with a suitable lifting strap. Weight of the fuel tank is 23 kg (51 lb).

Caterpillar Information System:

302.5 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Service Meter Mode
302.5 Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Install
302.5 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
312B Excavator Machine Systems Travel Motor - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
S3 Shear and CR3 Crusher Cutting Arm
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Disassemble
302.5 Mini Hydraulic Excavator Machine Systems Front Idler - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.