Engine Oil Filler and Oil Level Gauge - Remove and Install
拆卸步骤
- 卸下带有机油加注口和油位表的盖 (1) 。 从盖 (1) 上卸下 O 形密封圈。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g00611965 |
Show/hide table
图 2 | g00611967 |
- 卸下仪表 (2) 。
- 卸下管 (3) 和垫片。
- 拆下支承 (5) 。
- 卸下弯头 (4) 和垫片。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 5P-3413     | 管密封胶     | -     |
B     | 5N-5561     | 硅润滑油     | -     |
- 检查所有零件,如有必要,更换零件。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将弯头 (4) 安装在带有新垫片的盖 (1) 上。
Show/hide table
图 3 | g00611967 |
Show/hide table
图 4 | g00611965 |
- 安装支承 (5) 。
- 安装带有新垫片的管 (3) 。 将工具 (A) 涂在螺纹上。
- 安装仪表 (2) 。
- 将新的 O 形密封圈安装在盖 (1) 。 使用工具 (B) 将 O 形密封圈固定到位。
- 安装带有机油加注口和油位表的盖 (1) 。
Caterpillar Information System:
SR4B Generators Component Descriptions
SR4B Generators General Information
C-15, C-16 and C-18 Truck Engines Engine Oil Filter Base - Remove
3612 and 3616 Engines Turbocharger - Install
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3126 Truck Engine Military Valve Mechanism Cover - Remove and Install
C-9 Engines for Caterpillar Built Machines Camshaft
3612 and 3616 Engines Turbocharger - Remove
3126B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C-15, C-16 and C-18 Truck Engines Front Cover - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C-9 Engines for Caterpillar Built Machines Crankshaft Seals
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Remove
SR4B Generators Glossary
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Install
3126B Engines for Caterpillar Built Machines Housing (Front) - Remove
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3126B Truck Engine Housing (Front) - Install
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install
3500B Engines Camshaft
C-15, C-16 and C-18 Truck Engines Engine Oil Filter Base - Install
G3304 and G3306 Engines Crankshaft