Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove plug (1) and drain the oil from the engine oil filter base into a suitable container for storage or disposal.
- Use Tooling (A) to remove oil filter (2).
Show/hide table
Illustration 2 g00611853 - Disconnect tube assembly for turbocharger oil (3).
- Remove nuts (4) and the bolts that hold the engine oil filter base to the engine oil cooler. Remove bolts (6) that hold engine oil filter base (5) to the cylinder block.
Show/hide table
Illustration 3 g01018410 - Remove bolts (7) that hold elbow (8) to engine oil filter base (5).
- Remove engine oil filter base (5).
Show/hide table
Illustration 1 | g00611747 |
Caterpillar Information System:
3612 and 3616 Engines Turbocharger - Install
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3126 Truck Engine Military Valve Mechanism Cover - Remove and Install
C-9 Engines for Caterpillar Built Machines Camshaft
3612 and 3616 Engines Turbocharger - Remove
3126B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C-15, C-16 and C-18 Truck Engines Front Cover - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
On-Highway Engines Electronic PTO Installation and Application Guide General Information
3126B Truck Engine Cylinder Head - Install
SR4B Generators General Information
SR4B Generators Component Descriptions
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install
C-9 Engines for Caterpillar Built Machines Crankshaft Seals
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Remove
SR4B Generators Glossary
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Install
3126B Engines for Caterpillar Built Machines Housing (Front) - Remove
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3126B Truck Engine Housing (Front) - Install
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install