Rocker Shaft and Pushrod - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 8T-2998     | 润滑剂     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 涂抹到推杆 (6) 的两端。
Show/hide table
图 1 | g01027368 |
- 安装推杆 (6) 和气门桥 (5) 。
- 定位摇臂轴 (3) 。 安装螺栓 (1) 和 (2) 。 手指带紧螺栓 (1) 和 (2) 。 用 100 ± 20 N·m (74 ± 15 lb ft) 的扭矩拧紧螺栓 (2) 。 用 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩拧紧螺栓 (1) 。
Show/hide table
图 2 | g01027366 |
- 在各个摇臂底面上涂抹工具 (A) 。
注: 确认推杆正确坐入随动件和摇臂中。
- 调整摇臂的气门间隙。 请参阅系统操作/测试和调整。
End By: 安装气门机构盖。 请参阅 拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
On-Highway Engines Electronic PTO Installation and Application Guide General Information
3126B Truck Engine Cylinder Head - Install
3034 Industrial Engine Model View Illustrations
3126B Truck Engine Cylinder Head - Remove
C-15, C-16 and C-18 Truck Engines Front Cover - Remove
3126B and 3126E On-highway Engines Lifter Group - Remove and Install
3034 Industrial Engine Reference Material
3126B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3408E and 3412E Industrial Engines Engine Electronics
3126 Truck Engine Military Camshaft - Install
C-9 Engines for Caterpillar Built Machines Cylinder Block
3126B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C-15, C-16 and C-18 Truck Engines Front Cover - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3612 and 3616 Engines Turbocharger - Remove
C-9 Engines for Caterpillar Built Machines Camshaft
3126 Truck Engine Military Valve Mechanism Cover - Remove and Install
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3612 and 3616 Engines Turbocharger - Install
C-15, C-16 and C-18 Truck Engines Engine Oil Filter Base - Remove
SR4B Generators General Information
SR4B Generators Component Descriptions
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install