Rocker Shaft - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1P-1855     | 挡圈钳     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将螺塞装入摇臂轴内。 将螺塞安装到 1.25 ± 0.25 mm (0.049 ± 0.010 in) 的深度。
- 利用干净的机油润滑摇臂轴的所有部件。
- 将弹簧 (6) 、台架 (5) 、排气摇臂 (4) 、进气摇臂 (3) 和台架 (2) 安装到摇臂轴上。
Show/hide table
图 1 | g00611468 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 使用工具 (A) 安装挡圈 (1) 。
End By: 安装摇臂轴。 请参阅 拆解和组装, "摇臂轴和推杆 - 安装"。
Caterpillar Information System:
C-15, C-16 and C-18 Truck Engines Front Cover - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3126B Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
On-Highway Engines Electronic PTO Installation and Application Guide General Information
3126B Truck Engine Cylinder Head - Install
3034 Industrial Engine Model View Illustrations
3126B Truck Engine Cylinder Head - Remove
C-15, C-16 and C-18 Truck Engines Front Cover - Remove
3126B and 3126E On-highway Engines Lifter Group - Remove and Install
3034 Industrial Engine Reference Material
3126B Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3612 and 3616 Engines Turbocharger - Remove
C-9 Engines for Caterpillar Built Machines Camshaft
3126 Truck Engine Military Valve Mechanism Cover - Remove and Install
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
3612 and 3616 Engines Turbocharger - Install
C-15, C-16 and C-18 Truck Engines Engine Oil Filter Base - Remove
SR4B Generators General Information
SR4B Generators Component Descriptions
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install
C-9 Engines for Caterpillar Built Machines Crankshaft Seals
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Remove
SR4B Generators Glossary